Toybreaker

Stock length, straight, good threads/splines, with all threaded fasteners $65 shipped. Also have brake rotor with hub and wheel hubs. LMK

Too bad you weren't looking in april. I could have brought my spare frame up when I went to South Jersey.

Topic title says it all. NOS Sneeky Pete nitrous oxide systems were designed as true "cheater kits." They will allow a user to obtain that extra tenth of a second without being obvious. They were designed as very compact, simple-to-use nitrous-only injection systems. Note that it will be necessary to jet carburetors a little richer while being "sneeky," because no additional fuel source is used. Kits comes complete with a super slim, easy-to-conceal 10 oz. bottle, a nitrous solenoid, nylon nitrous line, wiring, 9-volt battery holder, and an assortment of jets. (Two required 9-volt batteries not included.) http://www.summitracing.com/parts/NOS-05029NOS Missing the Nylon nitrous line (it split) everything else is still plastic wrapped to the NOS cardboard. I can modify a stock crossover tube for the nitrous jet that way you can run it without having to split the output and worry about hitting 1 cylinder more than the other. A new 10 foot nylon tube is $28. Retail is $249 before shipping $175 shipped

Thats a shame. Good looking bike. Good luck with the sale, and with the job hunt.

http://cgi.ebay.com/ebaymotors/Yamaha-Banshee-Idle-Screw-kit-w-tap-drill-bit-_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dSIQ26itsQ3dIQ26ituQ3dUCIQ252BUAQ252BFICSQ26otnQ3d20Q26pmodQ3d310174871205Q26psQ3d54QQ_trksidZp3284Q2em263QQitemZ200356038297 Here is a complete kit with new Idle screws.

Let me check my tap drawer. you might get lucky.

Moving to Guam soon and have to sell my banshees Both have california titles 96 cool head 21 domes boysen rad valves freshly rebuilt stock carbs (tors eliminated) 64.25 bore stock port stock stroke engine K&N filter with outerwear Toomey pipes white / red only ridden at glamis from 96-09 Only ridden twice from 09-present (caw and Womba state park) $2200 delivered 89 Has replacement yamaha a-arm frame +2+1 roll arms competition engineering worked pep ressie triple rate shocks (front) competition engineering worked stock rear shock 64.25 bore stock cylinders trued and welded stock stroke/rod crank Cool head 20cc domes freshly rebuilt stock carbs K&N filter with outerwear FMF fatty pipes tag 1 1/8 bar adaptor renthal 1 1/8 fat bars Aftermarket adjustable CDI shift star modded clutch pancake bearing modded shift drum has a bearing on it. (look up the yakkey mod. Alba action sports sells it) $3500 Delivered coming to pick them up will get you a $100 break on the price. If i don't get what I think they are worth I'll put em in storage until I get back.

Most recent Good buyer post For BODE1 Our transaction for my dune wheels went off without a hitch. Even though He was out of the State when I delivered the wheels. WOULD NOT HESITATE to do business with him again. Absolutely a great buyer....

http://cgi.ebay.com/ebaymotors/banshee-drag-crank-crankshaft-stroker-billet-twister-20-_W0QQcmdZViewItemQQhashZitem3366aa6c8eQQitemZ220765777038QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

Another happy customer chiming in for Jeff, I ordered a bunch of parts to "refresh" my dune bikes engine. Extremely professional, very informative, excellent price and quick shipping. Thanks again Jeff!

I bought a YF450 pipe from him. Pipe was OVERPACKAGED, shipped price was good and shipping was quick (If the warehouse guy would have called me I would have gotten it almost a week sooner though!)

Replied, gonna be in South Jersey around 23rd of April... can bring em with me if you want.

As seen in the first post I also have a set of dune wheels. razors and Skate II's on douglas .125 aluminum rims. Haulers are sun checked but hold air just fine. Pm's asking for outright purchase price.. $300 for the haulers plus shipping $150 for the razors and skates plus shipping I am willing to use a proxy... Or you can check out powerstrokenation.com and look up toybreaker on there... I am more into 7.3 diesels than banshee's currently.

I am going to post the photo's to the thread. Not going to pm everyone that is asking for the pictures.

I can take pics when i get home. They have been in the shed for over 2 years, So i need to clean them up. they are not pretty at all.... I'll get em clean and shiny before they get packed up.

Or your stock stroke crank and cash. I also have lower a-arms, and some other misc stuff. Live in the Southeast. No dunes near here and all the drag racing is asphalt around here.

Now i just have to make it fit my KFX

$90 shipped?

Got a 2005 kawasaki KFX400 for almost nothing from a friend and it is missing some pieces parts I need shifter seat stator cover plug that goes over the crank bolt 2 vlave cover bolts grab bar head and tail lights please let me know if you have any of these items. thanks! maybe there should be a non banshee WTB section?

Anyone thought about doing a DIY thread sticky section? Or a closed sticky thread with links to all the most commonly asked about maintenance, or modification threads? I.E. Meats polishing thread, DC stator conversion, adding ball joints to stock Banshee control arms, YFZ 450 arm conversion etc.....

Thanks for the heads up about stadium yamaha. i got just the parts i was looking for, plus they gave me a discount on their already discounted (from yamaha list prices anyway) for being active duty Military! Both the Shee's will be running good this weekend!

Those look Sick! have you done just a yamaha symbol?

Got a tank plastic, $15 plus shipping... where r u at I'll pm you the shipped price.

1) What type of aftermarket exhaust do you have? FMF Fatty (mine) T5 (hers) 2) What type of airfilter do you have? K&N with outerwear (both) 3) Are you a stock airbox with NO lid (both) 4) What is your elevation? -20 to 250 5) What size pilot jets are you using? 27.5 (both) 6) What size main jets are you using? 270 (hers) 280 (mine) 7) What temperature is your Banshee jetted for? 90F 8) Do you have a port job? no 9) What kind of carbs? stock 10) What size carbs? stock

Stock your site was the first one i went to. However, i only need float bowl screws, needle valve assemblies and bowl gaskets. I have toomey needles, multiple O-ring kits and the carbs are jetted perfect.