05Special

Message me if these are available?

And I'm sorry 34mm carbs

I picked it up for 1100$. Can't really complain. Lot of little things I already fixed but can't figure this out. I'm not a fan of the pipes. At all. Good for a trail bike, that's about it.

Yea I bought the bike like this.

Tors remove , 30mm keihen flatslide carbs. Clamp ons. 58 pilot, 160 mains. Ptr mids exhaust. I'm lost. Changed the coil also. Compression is good as well

Not for nothing, but if the welds were cleaner and those pipes were polished and clear coated I'd think it would look kind of cool. Rat rod look. Whoever mAde it my hats off to ya. That's a crapload of fab work. Don't look good, but functional

What should I get for an ohm reading through the caps?

Changing the coil, wires, and Cdi from my buddy's bike tonight. Fingers crossed

Tors already removed. It has 30 mm carbs

This is my 6th bike. I know banshees pretty well. I have s very hard sputter from 1/3 to full throttle. Bought bike real cheap. New reeds, cleaned the carbs, new air filters and even checked the gap on the pick up on the flywheel. I'm lost. I changed the mains and the pilots as well as adjusted the needle. I'm starting to think its electrical and has to do with spark. Gonna do a compression test later to just make sure I don't have a cracked sleeve or bad rings but the bike barely smokes. Any ideas guys???? I can always figure these bikes out and it's pissing me off.. Thanks

I have a set of Paul turners I'm trying to get rid of. They were on a bike I bought. Great low end to mid power. They're painted black but look pretty good. Sound good too. Message me if your interested. I had pro circuits on my last bike. Great all around pipe also.

Looking for anything except fmf,DG, and pc. In frame small bore. Preferably chrome

Need three shocks best shape I can get. Prefer Ella but stock is fine for now. Also looking for in frame drag pipes . Link what you got thanks

Hey guys, haven't been on here in a bit. I sold my last bike. I used to run the New England hill limbs and am building a new bike for next season. Thinking of running a 10mm cheetah. I do ride a little , mostly climbing hills in pits. Anyone run a 10mm recreationally? Won't be much. Just curious as to how the ride ability is. I used to run a drag ported 4 mm stock cylinder with 34mm carbs and some other work. Did good numbers on the hill and always placed. Just looking to build a white knuckle monster that I can ride the pits here and there. Wondering how reliable the 10mm cheetahs are. Thanks guys

it won't let me post it, the pic is a little dirty but i can send it via phone.....don't want to get rid of it, but have too...