r2n2d

How much for the frame shipped to 02649 MA. thanks Rob

My shee is running better on choke. I am getting better throttle response. Does it mean my pilot is to small or what. Is my main to big?

My brother is looking for some used pipes just to by. let me know if you would sell out right and how much to ship you MA if you can.

I am interested in the frame. I cracked mine up the other day. let me know the price and where you are. thanks

I am looking for a banshee close to or in MA. I live in Cape Cod. I have a motor so I was looking for a roller. I have plastics and other parts but let me know if anyone has one.

ttt

I am looking for the trail tech stock mounts for the lights. I already have the lights and handlebar mount but, I want to move them from the handlebars to the stock location. If anyone has them for a decent price or want the handlebar mounts then let me know. I also have pics available. Thanks Robert

Do you have any pics? I am interested where do you live

I was testing my stator to see if it was my problem with my spark. I know on a stock stator it should be between 13.7 and 20.5. I have a 200w ricky and wanted to know if 27.4 was in the specs for a 200w

I hadn't touched the clutch or anything. I had the tors electrical unplugged. I have keihn 28 pwks so there was no need for them.

My bike has been acting weird lately. When I start her up she idles fine. Once I put it in 1st and let the clutch out it stalls out. I can rev it with the clutch pulled in but I am not sure whats going on. Any ideas????

If you still have the roller could you let me know the year, pics r2n2d@aol.com and price? also where in ny, I am in MA thanks Robert you can just send all the info to r2n2d@aol.com thanks again

whats your asking price?

I ran the bike today with the needle on the 2nd the clip 160 main 42 pilot. It was strong in the mid but it seemed alittle slower on the top. When I move the clips down to the 3 or 4 will it effect the top alittle? I have to do it for the hestiation anyways. but just thought I would ask before then. Also did the plug test. It was a light gray brownish color.

So before i switched the jets I started it and it didn't start first kick it was like a few. I then switched to the 160 main and the 42 pilot needle 2nd clip(2nd from the top). It started with both chokes on on the second kick but it began reving higher than it should at idle with the chokes on and backfired. I turned the choke off and it shout off. it still was hesitant when I start on the gas. what should I do?