RNBRAD

RNBRAD12@aol.com

Male

Oklahoma

Making things shine.

1999 Yamaha Banshee 4mil stroked (68mm) cheetah cub cylinders, Wiseco hot rods LR true and welded crank with max load bearing. Wiseco pro-lite blaster pistons, port matched cases, Clean up porting done by Jeff at FAST Racing, Pingel dual petcock, Pro-Design cool head with 19cc domes. Pro-design adjustable timing advance plate at +7 degrees, 5/8'' Scream-n Products billet reed spacers, V-Force reed cages, Boss intake manifold, dual 35mm keihin pwk carbs with cel needles, 160 mains and 55 pilots mated to dual K&N's wrapped with Outerwears. F.A.S.T. Racing clutch with Hinson basket, shift star modification,Trinity Stage IV stainless exhaust system with billet front and rear pipe hangers, Cascade heat shield protecting filters, UMI coolant bottle relocator, FlexiKool SS radiator hoses, Pro-design mega-flow coolant impeller, Pro-design EZ drain, 200 watt Ricky Stator with Ricky Stator flywheel lightened with stronger magnets. Nology Pro-Fire coil, Chrome Janssen +4 MX-Tech swingarm, +2+ 1 MX-Tech a-arms with heim joints protective boots and shark racing billet a-arm pivot covers, Janssen +1 anti-vibe steering stem. Works dual rate chrome front shocks with rezi's, rear rebuilt with elka and eibach components by Shane at lobo performance, RPM Dominator axle, axle lock nut and sprocket hub. Lonestar rear billet hubs and brake hub. RPM cyclone billet front hubs, Galfer wave rotor with front and rear Galfer braided lines, Ti-Moly Sidewinder rear sprocket with tool steel front and DID atv x-ring chain, PP case saver, Alloyboltz stainless swingarm pivot bolt, Janssen billet brake line clamps, Cascade billet stator case, water pump, clutch insert, brake and throttle covers, gas cap, dip stick, brake block off plate, front grill, tail light cover, thumb throttle lever, and seat cover. Mod Quad rear billet brake resevoir, cap and billet gas tank vent. PRM front and rear bumpers, Works Connection pro perch clutch lever and cable, Renthal bars, billet foot pegs, cascade gear slammer, trimmed front fenders, Trail Tech lights with 75 watt bulbs and clear covers. Polished items include front and rear bumpers, juggs, cases, silencers, carb bowls, all brake calipers, rear shock resevoir, body and pivot arm, front hubs, clutch case, throttle case, master cylinder and lever, rear brake plunger, handle bars. all nuts and bolts polished SS. I run Sunoco 110 octane purple with Mobil MX-2T synthetic pre-mix at 40:1 and MX4T protects the gears.