pimpeinkc

mine is rod is stuck in my crank.. i carry a big drill bit and a pipe tap with me whereever i go.. since there is no oil or anything i just carry a plug and some tape to put back in there if it ever messes up while i am at the dunes...

banshee - -- t5's- dyna-2into1 with 35pwk, rad valves with spacers. k&n on the carb. 48h.p. and 35 lbs.torque yfz450 - - - pulse charger, esr intake, dyna, - 43 hp - 27lbs torque...... same dyno my yfz will kill my banshee in the same race... food for thought, tansmision plays a big roll... haha

i just tested mine out this past weekend 24mar06 and they are awesome, i was haulin ass and came up on like a 6-8 foot straight drop off, i locked up the brakes, but i still flew, landed it nicely, with the stockers i would have been over for sure, plus the jumping is way better, and they are not streching my ball joints like has been posted,,, imo, buy them, you will love the results the yfz450 shocks ,,,, just to clarify

he gave me your address, i will be on the road in a few days.... lmao had a great time and thanks for the video of my moms boyfriend crashing, i been laughing my ass off all day watchin it.. later

great weekend, had a lot of fun, bobby,tim, and christy were killin a lot of people, afro' boy was running good too. i got beat a lot but still had a good time, ... can't wait till the next time

i have a set of banshee shocks for sale, they have red shock covers on them, never had the covers off so i don't know what color the springs are? i went to yfz450 shocks so i don't need them anymore.....

they make tools to get them out, go to mcmaster carr web site, or msc industrial supply co. and check them out, if that don't work, breaking it is an option due to the hardness, but it will more than likely leave some in there which will make it hard to re-tap it, if yo know what i mean.. the dremal and flat head is a good option, how deep is it in the hole, i would pm me, i dont check back every day. later eric

sweet, my b-day was the 13th.... and i turned 30.... it is harder now, i think the end is near,,, live it up today, your old now....

read my sig, nuff said,,,,,, i put tons of cash in that bike and am so much better off now, if you are still wanting to make it go,,,, port the head, get a hot cam and hi compression piston, bigger carb is a must as well..... the pipe did not do much, or the k&n... cam and piston around 150 - 200 carb - 200+ almost up to the price of a used yfz450

i bought a set of banshee pegs off ebay and cut the peg from the mont and welded them together, i bought a set of yfz450 pegs and was going to cut them off and weld them to the mounts, instead i bought the ac propeg nerfs and the pegs are awesome, like twice as wide and like a foot long. i can put both my feet on the same peg and there is still room on the end...

if you want to stay on pump gas, i would go with 21cc or bigger domes... as for timing, you could get the plate or a deg. key, depends on if you plan on adjusting it

unless you are bored out i would go back to the 280 mains

http://albinoblacksheep.com/flash/posting.php here is a good link

a termite walks into a bar and asks,,,,, is your bar tender here....

the mon test is to see how much compression it takes to detonate, right, which would make sence, high compression, more detonation unless rate for said compression