siezed-up

I will check them out ,thanks.

Thanks, I found it and didn't have to look very long

I didn't want to take the time to sift through a hundred post to get my answer. Didn't there used to be a jetting calculator that would get you pretty close to your target jetting? I printed a copy of it a couple of years ago and proceeded to lose it like a jackass. O.k. on to my next question I have stock porting FMF pipes PWK 28mm carbs K&N clamp ons 2000 above sea level. If someone has an idea about my initial jetting that would be great, I think I'm at 150 mains and 48 pilot. Not running good. Thanks, Joe

I'm building a 4mil engine with drag porting and was wondering how big of carbs you guys reccomended and what kind. I would like to stay away from alchohol right now. I did a search and didn't want to sift though a hundred posts.

Hi, I guess I'm new to a stock Banshee. I've built a couple with close to 200 psi compression, but I can't find what the minimum compression values should be for a stock shee. I did a search here but I got into way more stuff than expected. I'm running about 120psi on each cyl. If elevation is an issue I'm about 2000ft above sea lev.

Looking for a set of good used and in working order Works front shocks (w/rezzies preffered). Also need a clutch basket with gear still attached.

I live close to Brighton MI, and am looking for a stock or almost stock Banshee.

Hi, Had a few leads and alot of dead ends, but nothing ever panned out. I just would like to thank all of you for the support and all of the posts on other sites. It really is pretty awesome how fast you can get the word out for something you had stolen and think no one else would care about (like most cops, and wives who think your obsessing over a mere toy), but you guys did. I spent alot of time customizing that quad, maybe not to everyones taste, but I did it on a budget that required me to fabricate alot of the parts and mods myself. It really makes you wonder if it's worth all that work just to give it away like that. After I thought I was at a point that I was fine with how fast my quad went and how it looked, it was stolen. I won't spend that much time on something like that again. If I have to I will pay to have the work done and have receipts for it. If you live in Michigan you have to have a policy on your quad or extra coverage added to your home-owners with documentation with what it is worth for it to be covered. Just some info for you if you plan on doing that ( I RECOMMEND IT) have all your receipts, print all Ebay purchases and keep them in a file, have alot of pictures of all mods. Don't just assume your home-owners will cover anything, because it doesn't cover what you think it should. Check with your insurance agent to verify what's covered. Hopefully you guys can benefit from my mistakes, because as easy as it is to say you would just beat, shoot, drag, kick, stab or rape the person who stole your quad, it could still happen when your not looking. Whoever stole it will get thiers eventually, I kind of figure this was probably payback for something I did in my younger days. Joe

Get a alarm system on your garage. They broke in the side door and rolled the overhead door just high enough to get it out, pushed it across the yard and loaded it into a truck. I don't know what else you could do besides sleeping with it or chaining a dog to it.

Starting to get a few leads, these guys have no idea what they stole. There are too many things that stand out on this machine, they would be lucky to get $800 or $900 bucks in parts off of it and maybe a grand whole. I'm offering $1,000.00 for someone to call me and say what location it was FOUND at and what bills they would like there money in. It's that simple. Hopefully these guys come to thier senses and not make this harder than it has to be. So far I've pretty much kept my cool but I'm starting to lose it. If the leads actually pan out ,I may be writing to you guys from jail, just kidding, but not really!!! Joe

I used a generic image hosting site. Is there an site that you guys prefer. It would seem that as soon as I log off the image goes away.

Haven't been on here in a while but I need some help. I live in Pinckney, Michigan, that's close to Brighton and Ann Arbor. My banshee was stolen last night and thought I would try and get the word out, mainly to people who might be going to Silver Lake this weekend. I figure it could show up there in some shape or form. Here's a list of what it had: Black fenders cut into flames(please don't give me any s@#T about using somebody elses idea, I already know) Red tank and radiator covers Alluminum gas cap with a flaming skull impression *The frame has been modified for yfz450 front shocks(taller shock towers)* 6" extended swing arm with a weld on it in the shape of the letter I Polished side case, cylinders, head, calipers and all hoses have braided s.s. lines and red fittings. Polished alluminum axle carrier. That's all that I can think of right now. I will attach a picture, please pay no attention to the shirtless idiot sitting on the four wheeler. Thanks for any help. Joe (734) 550-6017. There will be a no questions asked ***$1,000.00*** reward for its return.

still

I need a set of front shock springs for a yfz450. Thanks, Joe