Jump to content

sheerider11

HQ Premium Member
  • Posts

    12,928
  • Joined

  • Last visited

  • Days Won

    107

Everything posted by sheerider11

  1. Do you have any of the tooling to do it? If not, your at a loss. You're going to spend more on that then the cost of a new crank. I see that you already asked this a few times. Why do you want to rebuild the crank?
  2. Maybe trim it in the part still stuck on.
  3. is it normal sand or dusty sand?Dust = foam only Anything else you can use A REAL K&N. Not the cheap knock off
  4. I messaged him on instagram. Asked for swatches. Never heard from him again. I know nothing about seats. So I don't know what materials there are. What's he gonna do take pics every 2 weeks of his materials so it stays current and I don'the have to scroll 239 weeks back? No. Sent from my SAMSUNG-SM-G890A using Tapatalk
  5. If he had a real website I'd be all for it. Not fucking Facebook. Couldn't even get him to send me sample swatches.
  6. It won't hurt in anyway.So I don't see why people wouldn't have one.
  7. mull had a write up.http://www.bansheehq.com/forums/index.php?/topic/164219-EXPLANATION-OF-CHASSIS-AND-ENGINE-GROUNDING
  8. Yup that. Good, I hope to never have to open it. But regardless, ground strap FTW!!! Cylinder base nut to engine mount on frame Sent from my SAMSUNG-SM-G890A using Tapatalk
  9. Wonder if it has to do with his whole grounding write up. But since I read that, I run a ground from engine to chassis. Might help, might not. But it doesn't hurt. My nology hot wires also have ground straps to the head. I went to walmart and got a lawn mower starter cable. Was like 8 bucks, I think like 2 or 4 gauge with 2 nice eyelets.
  10. Banshee - $6500 http://cnj.craigslist.org/snw/5659876958.html via cPro for Craigslist: http://tinyurl.com/CL-Android The shit I have to deal with here
  11. Seen pics of them weld them selves to the snout and pull out some nice chunks. As far as why? I'm not sure I luckily have never personally had an issue. I think it's from not lapping the flywheel to the crank and it arcs. But hopefully someone smarter theN me has a proven answer
  12. Don't know what they are worth. I'll ask 45 shipped but open to offers. Maybe a trade on little shit too. Ran on pump 5° sea level. Made 80 hp cpi 35pwk 4 mil 115 rod Sleeper06 port. Show the littlest but if deto in the clean dome. Probably from the times I've used gas from no name stations. The one dome is banged up from when my piston let go. Most is cosmetic, very few deep grooves. Most just on the surface. The skirt collapsed, so not much made it to the top, and what ever did was small. The tops where the plugs go are dinged from the wrench. No effects on anything. If anyone thinks these are trash let me know and I'll pull the ad. Sent from my SAMSUNG-SM-G890A using Tapatalk
  13. Probably wants another turbo raptor
  14. I'm willing to bet that there is more then a few dealers that would complain
  15. A competent engine builder like one of the sponsors here will have no problem with just an engine
  16. I remember I put some pistons on a crank. Possibly a 4 mil 110 rid and it did or some configuration.
  17. Those look exactly like the TM ones Leager was talking about
×
×
  • Create New...