sheerider11

Rebuild your stock shock.

Did you clean the jets out? The pilot in particular. Did you ohm the caps? Or the coil? Swap the wires and see if the miss follows.

The inlets on this rad are smaller then the banshee.

I have a Kx 65 rad I'd trade. Or you can have it. I really don't care.

I bought one from komisar on eBay about 3 months ago. Girlfriend wants one now. Also always nice to have the rare parts on the shelf.

Here's the problem with fmf. It's the owner. Fmf are hands down the biggest pipe manufacturer. Cheapest too. So any one can get there hands on them. They wind up on 90%of bikes that are basic bolt on bikes. Next are toomey. But they end up on these bike that basic beat up un maintained bike. So it gets sold to the next guy. Bike runs like crap, pipes get swapped along with 1000 other things. Now they turn around and say it was all the pipes. It's like people saying banshees are high maintenance, hard to tune, temperamental to temp change, and all other stupid rumors. It takes one guy to say it and word to spread around. And being fmf has been around since the beginning that's the rep that they got. It's been being sai for the longest time.

NEED one. I'd really hate to pay 200 for a bumper. Can be rusted and pitted. Just need straight and no dents.

Where in jersey are you?

Shocks a arms swing arm.

I have flexx bars and an antivibe stem. I wouldn't change a thing. I noticed a huge change in arm pump, numbness, and fatigue. I also have a steering stabilizer that helps a lot.

Same price for spray paint or powder coat FTW!!

Weren't you just asking where you can get your stock cylinders ported??

Or instead of asking questions and waiting for answers, just do a search. Go through the sponsors list. See who's close to you or has what your looking for. Sent from my iPhone using Tapatalk

NO!!!!! Go to the bad seller thread. Do a search on here.

But wouldn't all the explosion escape if that wasn't there?? I think it's 100% needed.

Lol.

20 for the bumper??

Ha, I heard this from an older guy at work probably about 2 weeks ago.

Yes. Not sure on stockers tho. I know if you buy any cp cylinder there usually ported by K&T. But there is in house stuff they do.

Great for individual parts and used parts. Not for engine work or tuning.

How much is a new one? They wear out and don't stay in place. If you give whoever a old used one you risk that being the case and then they get upset about that. I know fast sells them. Just don't know the cost.

Hell yeah it is. If you have access to one use this. Sent from my iPhone using Tapatalk

Pffffff. I wouldn't let them tune my lawn mower

Well if you look close, there's a honda throttle on there. There 300 dollar handle bars. I wouldn't put junk on them. I can buy the 80 dollar billet mattoon. The moose. The dual gasser. And I have. But I settled for a 15 dollar 400ex throttle. Comfort is top priority for me. I broke both wrist while riding. I'm not gonna bother anymore. I'm done arguing about a throttle. I was 16 once too. So I know you know everything like did.

Fuck. Off they come.