brugal
-
Posts
1,551 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by brugal
-
Coolhaeds are supposed to make your bike run cooler.They dont add any horsepower to my knowledge.Most people get them for the interchangeable domes and the Orings. And yes ,you can put them on a stock motor,but you would be better off with the timming plate cause you will feel the difference,Ricky Stator has them for the low.
-
Buy the stocks,if you want to shine ,get Cascade they have the rubber also.
-
Buy a new one. :thumbsup:
-
Get a timing plate.
-
Ive never heard of one shattering,more than likely it'll melt.
-
Exactly what I was thinking.30s on a stock with no port n polish.Why?
-
The answer is yes.If,MEAT still has his site up ,you can go to www.thebansheezone.com and see how he did it. :thumbsup:
-
The answer is yes, you can.
-
Ive had Holeshots and Kenda ,both held up great,two seasons each.my next set will kenda gnarlys.Ive never used max rzr.
-
That truely sucks sounds like its time for a new crank.You might as well get a 4mm stroker
-
If shee's blowing a thick white smoke, its your head gasket.And if you had to ride while overheating you may have warped the head.First check your radiatoe cap then the hoses.
-
Do you hear the radiator bubbling after you ride? If so ,your overheating. Is their heavy white smoke out the pipes? If so you have a blown headgasket.Hope that helps you out some..
-
Fattys are just fine...
-
About how much for porting and assembly
brugal replied to Killdmycobra's topic in Banshee Repairs and Mods
$500.00 ,and if you get some change back ,you did good... -
Thanks for the link.I learned something new,good stuff...
-
Good looking out...
-
Anyone ever pieced together a bike from nothing?
brugal replied to JasonsBanshee's topic in Banshee Repairs and Mods
.Bad idea... -
Thanks for the knowledge...
-
e bay has them..
-
yes they will.
-
[ . As much as I don't want to admit it I'm thinking it is the crank seal. What a project!! 410456[/snapback] What a mission.
-
You may have blown one of the O rings in your cool head..
-
Help Im melting Always good to have a back up ready ...
-
Your going to have to buy a Clymers manuel..To clean the carbs you have to take them off the bike ,then take them apart.Its not something someone is going to type out for you.
-
Eliminate the problem all together, get rid of the reserve and the hose