Yamahammer

They are 21 12 8 17 paddles staggered cut on 10 inch wide rims.

Here is my shee the head lights are pretty unique

Ill be at wash 4 mix of everything banshees other quads big trucks SXS 40 or more all ages wives, and kids. Here is my truck you cant miss it

Thanks john it was a Little bit of a battle getting it to run right but its almost there. I have a dyno test and tune set up in glamis over thanksgiving so hopefully i can get it 100% and have some numbers. Cant wait to see you guys in Feb, is sure you're brother coming also.

nope BB sheer 7 mill cub cleaned up, case matched, lock up, r-1 clutch ,39 pwk's,Big bowls on carbs, vforce 3 reeds ,Ricky stator 200 watt stator and flywheel and adjustable timing plate, Lone star rear axle, + 6 rear arm,shock re-valved by race tech, Quick sand front arms +2 +1 full hiem, works triple rates, lone star +2 +1 steering stem, 1 1/8 Suzuki bend bars, Full ASV levers shorty's rotators and shields, 1 Piece braided lines,Tether kill switch,Hella 4000 lights 100 watt bulbs,Ricky stator light bar cut and modified, custom made rear tail light led Orange in color dual filament,IMS foot pegs down 1 back 1,Taylor spark plug wires,custom seat cover,GYTR belly skid plate and side panels,RIS front bumper,Kicker shifter brake lever and grab bar chromed, all the billet stuff, and I'm sure there is more little stuff. i bought this bike new in the end of 02 for a Christmas present and know have this its been done like the current state for a couple years could not ride it last year due to hand surgery. So you can imagine how pumped i am to get it out for thanksgiving to glamis.

Last ones

A couple more

Cleaned it up added a little polish to bling it out a bit and then snapped some photos so here they are.

where are you gettign a 65 temp in glamis at. what is it jetted to currently and at what elevation.

What air filter system are you running and how did the suggestion work out. with pods you usually go up 2 jet size's on the mains. Also what needles are you using stock or aftermarket.

I had the same issues and chased the jetting for a year before i got float bowl's and a pingle. Also if you are using a billet cap and one of those billet hose toppers get rid of it and run a straight hose. The billet top will restrict the air flow and cause a vacuum in the tank.

you can run a battery powered flashing light for a tail light. Like the bicyclists use thats what they use on the dirt bikes just a thought if you are totally against the brake light . Brake lights save lives at night for witches eyes and to warn or find others rider's i like them but to each his own.

Nice pic's in LS But the paddles are paddlabrat's from Fullerton sand tire staggered cut number 2 paddles cut off, 14 paddles IIRC they are for duning and dragging the stagger cut makes them slide better than a hauler. Well at least that's what they tell me i am going to try a set of haulers next time out, but they do hook pretty good. Ill get some better pic's today of the bike and tires.

That swing arm might hurt you a bit being so long a 4 is probably all you need and the paddles for a 8 over arm will need to be alot. Nice bike i like the paint i trimmed some painted plastics a while back and put black door trim on the cut edge to keep the paint from peeling. Any pics of the 74 in you're sig?

Well its been a while since i have been on here so i figured i would reintroduce, i stoped coming on here shortly after finishing my build a little dune bike. Here is a pic from turkeyday 08