Big Mike NY

Just curious how would Honda 250R gearing work on banshees? Like say 13/38? Would that be a compatible gearing to stock banshee 14/41?? Why would banshee guys run a Honda a Honda sprocket hub?

I'm just playing my brother is local 3 NYC and he breaks his ass I know for sure!! Anyway not to sabotage OP's post, def get in touch with Sleeper I know he's working mad hours right now but he'll get back to you!!

^^^^^^^^^^^^^^^^^^^^

Operating Engineers and Electricians... EHHHH, you premadonnas!! :) . Be a concrete laborer and shovel concrete all day or a metal lather picking up and bending #10 rebar all day!

Cool so your a dockbuilder?

For who Posilico??

X 100 for Sleeper! Best advice I have gotten from this forum was to contact him then found out he's only 15 min from me SCORE!!!!!

This is how I would describe pretty much all my time in my garage! LOL

Sleeper woke my stock cylinders up big time after a local shop did what they called porting.. He knows what he's doing and not just with engines and tuning! He set up my entire front end on my 250R. Definetly recommend him!! He's going to be building me a similar setup of Craig B's - a 10 mil screamer!

What kind of riding do you do??

When it comes to the last line and really the only line of defense of air filtration and safety of the motor I wouldn't look to cut any corners, I'm all about saving $ as much as the next guy, but when it comes to keeping your motor healthy and safe and for minimal difference in dollars get the legit air filters and outer wears..

If there is no color on those plugs could the bike be misfiring??

Do you have and infrared sesnor? What are the temps of your pipe about 4" off the head do you know? That should give you some indication of what's going on there, no change in plug color what kind of gas are you running again?

Those tires look like they hook like a mother! The lugs look shaped slightly different than the ambushes, it appears the ambushes have a more squarish lug. is there a noticeable difference? Didn't you remove alternating rows Tyler? Would you suggest doing that or leaving them as they are? Craig I'd like know what tire you end up with.. Good luck finding a tire!

Thank you guys.. I Found a full set, calipers, wave rotors, hubs, spindles all yzf, and ASV brake and clutch lever and stainless steel lines for a price I couldn't refuse! If I did they'd be a dead horses head in my bed!

Fucking beautufil setup, what kind of axle is that and how long is your Swingarm?

Front brakes setup and rear Elka mine !!

FYI House Of Horsepower is now Cannon Suspension and the dude in charge there is Mark...

Very very sweet pipes!!!!

Yes ready to bolt on, my rotors are good, hubs are good and lines are good...

Must be in good condition please, good brake pads and seals... Send me what you got ammarca@optonline.net or I have to go fishing on eBay.. Thanks- Mike

Agreed I don't belong on Facebook so if they "only" advertise via Facebook they do not exist to me.

I had that problem with oil in my old FMF's, the culprit was cracked reeds..

What's awesome for me is his house/shop is 5 min from my office! So he's right in my neighborhood! He always answers all my questions and gives me a lot of insight, I am constantly learning from him!!! He is the man!