jadaven Posted December 17, 2003 Report Share Posted December 17, 2003 OK, im sick of my bolts coming out of the front fenders. Plus on my last ride i lost one of the braces for the front plastics. What do you all think is the best way and how to cut the plastics. I want just a little fender left but not so it looks dumbo eared or no fender at all. Thanks Quote Link to comment Share on other sites More sharing options...
Yamahammer Posted December 17, 2003 Report Share Posted December 17, 2003 Any kind of saw hack sawzall hand saw what ever tape the patern also the good side make the tape cut mark even on both sides then have at it. then sand it even and smoth then hit the edge with a propane torch or a heat gun Quote Link to comment Share on other sites More sharing options...
ScreaminShee01 Posted December 17, 2003 Report Share Posted December 17, 2003 nice lookin shee yamahammer (thumps up) Quote Link to comment Share on other sites More sharing options...
Yamahammer Posted December 18, 2003 Report Share Posted December 18, 2003 ; Thanks Quote Link to comment Share on other sites More sharing options...
Wallrat Posted December 18, 2003 Report Share Posted December 18, 2003 You could use a dry erase marker (like the kind used on white boards) to draw a cut line. The marker will wipe off with your finger when done. Quote Link to comment Share on other sites More sharing options...
evil Posted December 18, 2003 Report Share Posted December 18, 2003 f%*k it man grab a butter knife, a bick lighter a few tooth pics and get to hacking ! Quote Link to comment Share on other sites More sharing options...
bansheeDUDE Posted December 22, 2003 Report Share Posted December 22, 2003 I used a hack saw a razor to get the edge's real nice! and the some real High grit sand paper. Came out mint! >> I'll have pics of my machine up right after the Holiday Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted December 22, 2003 Report Share Posted December 22, 2003 I used some electrical tape for an outline on the fenders, then used a jigsaw with a fine-toothed blade & followed the edge of the tape. Worked out great, clean cut & looks awesome... Quote Link to comment Share on other sites More sharing options...
Z Rider Posted December 23, 2003 Report Share Posted December 23, 2003 CHECK THIS OUT This is the way man.... but we are tooooooooo lazzy to do it! ja Quote Link to comment Share on other sites More sharing options...
ScreaminShee01 Posted December 23, 2003 Report Share Posted December 23, 2003 woah now Quote Link to comment Share on other sites More sharing options...
fah_Q Posted December 24, 2003 Report Share Posted December 24, 2003 check out mine. i went to cascade and had them cut the front and the back. Quote Link to comment Share on other sites More sharing options...
evil Posted December 24, 2003 Report Share Posted December 24, 2003 check out mine. i went to cascade and had them cut the front and the back. sweet ass shee fah....., but you paid cascade to do that Quote Link to comment Share on other sites More sharing options...
Screamin_Demon Posted December 24, 2003 Report Share Posted December 24, 2003 Use whatever you have on hand to cut them with... just make sure to touch them up with a razor blade and sand the edges down. I used a drill and made holes along where I was wanting the cut to go, then tore the fenders off. Quote Link to comment Share on other sites More sharing options...
shee03 Posted December 24, 2003 Report Share Posted December 24, 2003 ok I want too cut my rear fender and i want to see some banshee with rear fender cut Quote Link to comment Share on other sites More sharing options...
ScreaminShee01 Posted December 26, 2003 Report Share Posted December 26, 2003 im sure theres ones in the drag forum.... look for the "lets ee those drag banshees" or somethin like that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.