keysboy10

so idk how to post pictures on here but if someone would email me id like to find out what pipes i have. ive been told they were cpi an told they were shears*? [email protected]

. it had bigger jets in it befor when i got it an did same thing there was a 260 an 250 i guess drilled out they both were same size but bigger than 300 how do i post pictures on here an ill show u

it had bigger jets in it befor when i got it an did same thing there was a 260 an 250 i guess drilled out they both were same size but bigger than 300 how do i post pictures on here an ill show u

its sounds ok bottom end but more than 1/2 throttle it breaks up

and im at sea level im in FLkeys

alright here it is i hope one of u guys can help me out there. my bike. 65mm bore k&N proflo with K&n filter with cut air box stock carbs 300 main 25 pilot needle is on second clip from top cpi in frames (what i was told) toomey ends bosyen* pedels on stock cages. now the bike starts right up sounds good to 1/2 open but wideopen falls on its face.???? buut if u keep it about hhalf its runns likes a beast. and if your windopen goin down a road an let off an try to stab it again feel like it falls back on its face. same with take off. have to wind it up to go any where my dad told me it could be from the pipes bein not right for my bike bein mostly stock idk why i cant post picture but if anyon can help an telling me what i should use or try would be great. i can send pics threw email.

i bought my quad recently an it had 15/39.. it only pulld after the middle of 3 but moooved after that . i had some sprokets laying around so i put 13/41 on it lastnight.. anyone run the same ? i could use some help with other shat to if anyone if interested in givein me some advise