sleeper06 Posted December 5, 2013 Report Posted December 5, 2013 I have a set of ported stock stroke cylinders that came off of wacko 2000 hybrid with .020 over pistons new rings new circlips wrist pin bearings and new base n head gaskets. The cylinders are an aggressive trail style port with roll on power in mind priced great at 550 let's move them guys need em gone make reasonable offers Quote
nastyracing Posted December 5, 2013 Report Posted December 5, 2013 Some killer jugs right here. Quote
wacko2000 Posted December 5, 2013 Report Posted December 5, 2013 NO offers, pay up suckers these cylinders rip- my SS hybrid laid it on a few built 4 pokes and mild banshee's Tons of life left, could port for a 4mil if you'd like also- Carl will do whatever you want just ask These are as fresh as they come!!!!! Carl's motors are running down motors built by the "best" in the country GET YOU SOME!!!! Quote
sleeper06 Posted December 5, 2013 Author Report Posted December 5, 2013 As wacko stated if you want cylinders adjusted for 4 mill I will do it free of charge and take off 50 bucks because pistons would be useless you would be at dune port status on a 4 mil similar to nasty racing cylinders or sheerider feel free to pm them there bikes run real hard Quote
Abe Posted December 5, 2013 Report Posted December 5, 2013 Interested in a set of very nice stock bore stock port cyls in a swap ? Quote
sheerider11 Posted December 5, 2013 Report Posted December 5, 2013 Yup. I told Carl exactly what I wanted, exceeded my expectation. And yes his motors are putting a hurt on a lot of bikes around here. I had a 4 mil stock cylinder done by a high end shop. From the get go I chased tuning issues. Lack of concern by builder resulted in never being able to fix it. Long story short, I blew my whole clutch to pieces (result of riding. Not builder) said F it brought it to carl. Said make me faster then the last asshole that left here. And now my bike is top dog among the local banshee guys. Quote
sleeper06 Posted December 5, 2013 Author Report Posted December 5, 2013 Sorry Abe I have about 10 sets of virgin cylinders on hand need cash rite now on to bigger build.i normally don't sell anything I'm a hoarder of banshee parts but wife said shits gotta go if I'm gonna bring something else home. 1 Quote
sleeper06 Posted January 2, 2014 Author Report Posted January 2, 2014 Yes sorry they are gone pm me if you need anything else Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.