Jump to content

Recommended Posts

Posted

I just picked up an 06 banshee and it has fatty pipes, pod filter and boost bottle. Other than that its stock. The problem is at low rpms, it seems like one cylinder dies but will start back firing if i pull the choke. After the rpms get higher the cylinder will start firing and will run good through out the powerband. Im at sea level, plugs look good and compression is 120 on both sides. Its running a 290 main and 25 pilot

Posted

The pilot jet in the carb on the cylinder that dies out is probably plugged up. You will need to clean it with a small strand of stiff wire and some carb cleaner.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...