Jump to content

Banshee right bank problem


Recommended Posts

Thoughts -

Crank out of phase.

Flywheel came loose.

Flooded on right carb.

Inspect flywheel trigger points for corrosion and proper gap.

Inspect reeds too.

Link to comment
Share on other sites

I bought with mods done but just the usual bolt on mods boost bottle vforce 3 Reeds pro flow intake KnN filter fmf fatty pipes not shore about jets have not pulled carbs apart to find out i am pretty shore it has not over heated and the coolant is same not eating it I'll check the fuel lines and see if they are loose hopefully that's all it is

Link to comment
Share on other sites

What's your elevation and riding temperature? I just switched my pilot jets from 25 to 30 and it runs a lot better. I've heard that FMF Fattys require at least a 30 to run smoothly. Mine was running like garbage in the idle - 1/4 throttle area and once I switched the jets it runs a lot better.

Link to comment
Share on other sites

What's your elevation and riding temperature? I just switched my pilot jets from 25 to 30 and it runs a lot better. I've heard that FMF Fattys require at least a 30 to run smoothly. Mine was running like garbage in the idle - 1/4 throttle area and once I switched the jets it runs a lot better.

 

Second time I have seen this ^^^ , maybe from you? Have 27.5 and seems to run good, but difficult to start at times.

Might have to try this

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...