DEM3500 Posted September 23, 2014 Report Share Posted September 23, 2014 $5000 this banshee has been my pride and joy since 2008. it was a gift to myself after i got divorced. my intention was to build a nice trail quad but went a little overboard! over the last few weeks i tore this thing down to the frame and powder coated everything! frame, arms, front bumper, rear grab bar, nerf bars and swinger are prismatic powders splatter blackhttp://www.prismaticpowders.com/colors/PWS-4344/splatter-black/the hubs, spindles, brake hub, and sprocket hubs are prismatic powders ink blackhttp://www.prismaticpowders.com/colors/P-0106S/ink-black/it has about 3 short rides on it since i did the rebuild. the port work is 1 out of 2 banshees that exist that have this engine setup. the only other bike thats setup like this was dynode at 70hp. i can say this with confidence because the guy that did the work is one of my best friends. if you are seriously interested in this i will give you the builders info.4mm stroker with matching port work.its runs on 110 octane and has only ever had amsoil dominator run through it.if i remember right its on its second or third bore.the head was shaved down and re domed to match the 4mm crank. basically it all looks like a stock banshee engine. its a total sleeper.....until you start it up!+2 +1 ASR a arms with all brand NEW teflon lined heims+4 roundhouse swinger with new pivot bearingsbillet impeller with inline coolant cooler with temp gauge+1 antivibe steering stem with NEW bushings and boltspro taper barsASV C6 brake and clutch leversbrand NEW brake pads front and rearNology profire coil with acell 8.8mm wireshttp://www.farmandsandtoys.com/partdetail.asp?partid=46GB racing CDI relocation brackethttp://www.banshee-parts.com/87-06-yamaha-banshee-cdi-relocation-bracket-gb-racing/tusk adjustable width rear axlehttps://www.rockymountainatvmc.com/p/733/32078/Tusk-Adjustable-Width-Racing-AxleFMF SST pipes with NEW o-ringsbrand NEW UNI pod filters34mm mikuni round slide carbsTORS eliminitatedteather kill switch shift drum has been modified with a roller bearing shift shaft has been modifiedscratches on the plastic but no cracksgripper seat cover with one small 1/2'' tear.axis single rate rear shock with remote rezzie. rebound and compression adjustableworks tripple rate front with remote rezzieif you know powersports you know how much those shocks alone are worth!im sure theres more that im forgetting. theres nothing much left thats still stock. this thing rips. theres no doubt about it. give me a txt or email any time. i can usually talk on the phone but txt or email first. i hate to let it go but i want to change gears to MX. it be willing to trade for a trx250r. other than that i dont want to trade for anything else. i already have too many toys so if i want a new one i have to get rid of an old one. you can ride it if you want but bring a helmet. i have a big enough yard to ride in circles and you can rip it down the street if you want. thanks for looking Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 (edited) a little fun in silver last year. that water is 5' deep! http://vid537.photobucket.com/albums/ff335/dem3500/waterskip2ndrun_zps5d3f9d63.mp4 Edited September 23, 2014 by DEM3500 Quote Link to comment Share on other sites More sharing options...
lowidenfast Posted September 23, 2014 Report Share Posted September 23, 2014 Nice bike, I love the blacked out look. Where are you located? I have a buddy with a nice '88 250R. He's just added Laegers + 2 A-arms, Elka stage 4 Long travel fronts, stage 4 rear, flexx handlebars, ASV levers, nerf bars etc. Don't think much is done to the motor but it makes good bottom end. The power comes on pretty much instantly the way it is set up. Definitely a nice woods/track bike. Not sure if he would even be interested but I'll run it by him Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 23, 2014 Author Report Share Posted September 23, 2014 Im in burton mi. Near flint north of detroit I would be interested. Thanks for the compliment! Quote Link to comment Share on other sites More sharing options...
lowidenfast Posted September 23, 2014 Report Share Posted September 23, 2014 I had one last year, an '89 model and I loved everything about it except getting my ass kicked in a straight line by my buddy's banshee so I had to go back to the banshee. I used to race MX on a banshee when I was in high school. I won the holeshot at every race but that's where my advantage over the other guys ended since my bike was nearly bone stock. Sure wish I would have had an R back then instead! GLWS 1 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted October 1, 2014 Author Report Share Posted October 1, 2014 I'm entertaining offeres. I'm also looking for a 90cc name brand quad. Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted December 17, 2014 Report Share Posted December 17, 2014 5k for that pig, goodluck dreamer go sell it on TRX250R.net Quote Link to comment Share on other sites More sharing options...
Soskunked Posted December 17, 2014 Report Share Posted December 17, 2014 I like the black theme an I think 5k is reasonable considering the motor sounds ok 5k for that pig, goodluck dreamer go sell it on TRX250R.net Your calling this guys bike a pig? You need to look in the mirror, you will see what a pig looks like. Learn some respect your making Australia look bad. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.