Jump to content

jetting help


elfsmachone

Recommended Posts

ok here we go I have an 06 banshee, I have had every issue with carbs finally just got rebuilt ones from ebay, they have the delete kit on them and idle screws installed best I can tell from other people they are installed properly, here comes the crazy when I got the carbs they had a 200 main and a 160 pilot jet run it very rich on bottom end, carbs also came with stock sized jets and stock type of jet, 25, installed them just to find that the 160 jets were shorter. quad wouldn't run with the 25 in it. got some 40 and 55 swapped out will run on 55 but seams lean going to get larger pilot jets but thought I would see if anyone has any insight

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...