Jump to content

New & Used Harnesses. Harness Cutting/Repair


Recommended Posts

I usually try not to write a book when I create a listing, but I do like to be very informative when describing my items/services, so here it is: I have new harnesses that I make myself -

 

OEM length drag cut - These harness are the same length as an OEM harness, but have the only wires you need to make your Banshee run ~ CDI, Coil, Killswitch, and Stator. These harnesses have the same color wires as an OEM harness, but appearance slightly diifer, so I refer to them as an OEM replica harness that has been drag cut.

 

These are available for all years 87-94  95-96  97-06. $75 shipped

 

NEW Shortened Drag Harness & CDI Relocation Bracket - This is a brand new harness that measures 24 inches in length and is long enough to reach your killswitch & coil (mounted in OEM location) when connected to your CDI box (which needs to be relocated behind your gas tank or somewhere close by/ your stator needs to directly plug into your CDI Box). The wire colors match OEM colors but slightly differ in appearance, but are NEW.

 

These are available for all years 87-94  95-96  97-06.  $50 shipped | Harness only $40 shipped

 

OEM Harness trimming - I cut off all of the unneeded wires, leaving you with the only 4 things required for spark & cut off - CDI,Coil,Killswitch, and Stator. I remove all of the dirty, greasy factory electrical tape and clean,cut, and re wrap your harness with new high temp electrical tape. I test fire my Banshee with every harness I have cut and will always do so before they are shipped back. I have not cut a harness yet and left the headlight wiring (paln on doing that soon, please check back).

 

This can be done to any year harness 87-06 $25 return shipping included

 

CDI/Harness Repair - I'm sure some of you have a harness that has a cracked connector and making you lose a little sleep at night, maybe not, I can replace your broken/cracked end for your stator or CDI Box for any year Banshee. I have not searched for ends for the keyswitch,lights, tors, etc, but I may have one lying around that I can replace for free if you're having a CDI or stator end repaired as well.

 

Repair for CDI Box ends 2GU-50/51  3GG-00  3GG-10 - 1end $15  2ends $20   3+ends $25 return shipping included.

 

I'll try to have detailed photos of everything described above, I'm having a hell of a time getting photos uploaded here (please enlighten me), if you do not see what you're looking for here, feel free to message me, and I'll be glad to give links to my Facebook page and/or my eBay listings.

 

Feel free to call/text also 336 803 1602

 

Thanks - Cory Kennedy

Harness E 97-06 HQ.jpg

  • Like 1
Link to comment
Share on other sites

The photos that I was unable to upload in this topic are in my gallery, so feel free to browse through them if you'd like.

Link to comment
Share on other sites

  • 3 weeks later...

Posted ImagePosted Image

 

Wanted to add a few more....... I don't think "text for photos" is the hot ticket.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • 3 weeks later...

Made this harness to work with JDS Customs CDI Relocation Bracket. Available for any year, 97-06 pictured. $60 shipped anywhere in the US

 

ta9etu5a.jpg

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Thanks y'all! Blast off I haven't made a harness with a key switch, but my Dad's Banshee has something similar to a key

6y8ere4a.jpg

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I'll take one like this for the low cost of shipping...Oh and I don't need any wires for lights. Oh, and I want it shrink wrapped instead of taped. Thanks.

 

ta9etu5a.jpg

 

So you're wanting a harness like this (97-06)

 

y9aduvus.jpg

 

It's hard to tell its heat shrink just by glancing at it, so you may need to zoom in

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...