Jump to content

What jets are you using? Fill out this form...


Recommended Posts

1) What type of aftermarket exhaust do you have? | CPI in frames

2) What type of airfilter do you have? | 2 stage UNI filters

3) Are you running a air box | air box removed

4) What is your elevation? | sea level upto 500

5) What size pilot jets are you using? 30

6) What size main jets are you using? 340

7) What temperature is your Banshee jetted for? | 15 - 30c

8) Do you have a port job? | no

9) What kind of carbs? | stock mikuni

>10) What size carbs? | 26mm

Edited by driftingbanshee
Link to comment
Share on other sites

Please copy and paste this along with your answers in your reply, thanks.

 

 

 

1) What type of aftermarket exhaust do you have?

Fatty's

 

2) What type of airfilter do you have?

K&N

 

3) Are you a)running a stock airbox with lid cool.gif stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

Stock airbox with snorkle off and vents in lid when below 60F, no lid Above 60F

 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com )

1000ft

5) What size pilot jets are you using?

30

 

6) What size main jets are you using?

340

 

7) What temperature is your Banshee jetted for?

80f

 

8) Do you have a port job?

Yes

 

9) What kind of carbs?

Stock

 

10) What size carbs?

26mm

 

 

Thanks!

Link to comment
Share on other sites

1) What type of aftermarket exhaust do you have? T5's

 

2) What type of airfilter do you have? K&N with adapter

 

3) Are you a)running a stock airbox without lid 

 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com )3250ft

 

5) What size pilot jets are you using?Stock 25

 

6) What size main jets are you using?280

 

7) What temperature is your Banshee jetted for?around 80F

 

8) Do you have a port job? Not yet

 

9) What kind of carbs? Mikuni

 

10) What size carbs? Stock

Link to comment
Share on other sites

  • 2 weeks later...

1) What type of aftermarket exhaust do you have? | FMF Fatty's

 

2) What type of airfilter do you have? | UNI Two-Stage Foam filter

 

3) Are you a)running a stock airbox with lid cool.gif stock airbox with NO lid c) Stock airbox with vents d) no airbox at all | A. Stock Setup

 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) | 600ft above sea level

 

5) What size pilot jets are you using? | 27.5 pilots

 

6) What size main jets are you using? | 270 and 280 mains

 

7) What temperature is your Banshee jetted for? | 60-90°

 

8) Do you have a port job? | No

 

9) What kind of carbs? | Stock Mikuni Carbs

 

10) What size carbs? | 26mm

 

 

Thanks!

 

Sent from My LG-LS970

Edited by ETR174
Link to comment
Share on other sites

  • 4 weeks later...

1) What type of aftermarket exhaust do you have? 

T5

2) What type of airfilter do you have?

ProFlow w/UNI

 

3) Are you a)running a stock airbox with lid cool.gif stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

No airbox lid, 4 vents

 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com )

146' ASL

 

5) What size pilot jets are you using?

Stock

6) What size main jets are you using?

330

 

7) What temperature is your Banshee jetted for?

85F

 

8) Do you have a port job?

No

 

9) What kind of carbs?

Stock w/o TORS - Stock needle, 3rd clip, 2.5 turns out

 

10) What size carbs?

Stock

Edited by tfaith08
Link to comment
Share on other sites

  • 1 month later...

my first post here guys ! just wanna say whatsup and thanks for allowing me to join !!!!!

 

 

1) What type of aftermarket exhaust do you have? pro circuit with 304 silencers

2) What type of air filter do you have? k&n

3) Are you a)running a stock air box with lid B) stock air box with NO lid c) Stock air box with vents d) no air box at all . B . stock no lid

4) What is your elevation? 60ft

5) What size pilot jets are you using? 30

6) What size main jets are you using? 300

7) What temperature is your Banshee jetted for?

8) Do you have a port job? no

9) What kind of carbs? Stock

10) What size carbs?

Link to comment
Share on other sites

1) What type of aftermarket exhaust do you have? Toomey T5's

2) What type of airfilter do you have? K&N pods

3) Are you a)running a stock airbox with lid cool.gif stock airbox with NO lid c) Stock airbox with vents d) no airbox at all/

No air box whatsoever

4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) 800'

5) What size pilot jets are you using? 25's but still questioning my jetting, may go back to larger pilot jets

6) What size main jets are you using? 290'sNeedle on 3rd position of 6

7) What temperature is your Banshee jetted for? New to jetting and still trying to get it right but it's hot and humid here.  I'd say 90 degree F

8) Do you have a port job? Stock port

9) What kind of carbs? stock

10) What size carbs? 26mm

 

+4 timing, 40:1 race gas mix with 90 octane ethanol free fuel ~105 octane

Link to comment
Share on other sites

  • 3 weeks later...

1) What type of aftermarket exhaust do you have?

 

Toomey t5

 

2) What type of airfilter do you have?

 

K&n pods

 

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

 

No air box

 

4) What is your elevation?

 

660ft

 

5) What size pilot jets are you using?

 

45

 

6) What size main jets are you using?

 

138

 

7) What temperature is your Banshee jetted for?

 

80-100

 

8) Do you have a port job?

 

No

 

9) What kind of carbs?

 

Kehin pwk

 

10) What size carbs?

 

28mm

 

Pro design cool head 19cc domes

 

Stock reeds, stock intake

 

Are these jets okay? It seemed to run "okay" but I've never owned a banshee before. So what do I know.

Link to comment
Share on other sites

 

1) What type of aftermarket exhaust do you have? T5

 

2) What type of airfilter do you have? Uni w/skins

 

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all. No box

 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com ). 0-600

 

5) What size pilot jets are you using? Na

 

6) What size main jets are you using? 145

 

7) What temperature is your Banshee jetted for? 60-110

 

8) Do you have a port job? 10 year old lrd port

 

9) What kind of carbs? Pwk

 

10) What size carbs? 30mm

 

14/40

 

+4 swing

 

+4 timing

 

Stock stroke motor. Runs like a champ with that old port job . im very happy with this play/dune bike

Link to comment
Share on other sites

  • 3 weeks later...

1) What type of aftermarket exhaust do you have? pc 304s 

2) What type of air filter do you have? k&n

3) Are you a)running a stock airbox with lid cool.gif stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

B . 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) sea level

5) What size pilot jets are you using?30

6) What size main jets are you using?340

7) What temperature is your Banshee jetted for? 20-60

8) Do you have a port job? bored 0ver with 65mm vitos super stock

9) What kind of carbs? stock

10) What size carbs? stock

Link to comment
Share on other sites

  • 5 weeks later...

1) What type of aftermarket exhaust do you have? T5's

 

2) What type of air filter do you have? uni 2 into 1

 

3) What type of airbox do you have? none

 

4) Whats your elevation? 700

 

5) What size pilot jets are you using? 30

 

6) What size mains are you using? 270 think I need 300's

 

7) What temperature is your banshee jetted for? 70 

 

8) Do you have a port job? stock

 

9) What kind of carbs? stock

 

10) What size carbs? 26mm

Link to comment
Share on other sites

  • 1 month later...

 

 

1) What type of aftermarket exhaust do you have? T5's

 

2) What type of air filter do you have? K/n 2 into 1

 

3) What type of airbox do you have? none

 

4) Whats your elevation? 712ft

 

5) What size pilot jets are you using? I can't remember!

 

6) What size mains are you using? 370's

 

7) What temperature is your banshee jetted for? 70

 

8) Do you have a port job? Trinity MX/TT port, kinda mild no boyesen ports, center bridge isn't knife edged

 

9) What kind of carbs? Mikuni TM flat slides, boyesen rad valves too

 

10) What size carbs? 34mm

Link to comment
Share on other sites

1) What type of aftermarket exhaust do you have? FMF fattys w/ turbinecore2

 

2) What type of air filter do you have? STOCK

 

3) What type of airbox do you have? STOCK

 

4) Whats your elevation? ~5000ft

 

5) What size pilot jets are you using? Stock 25s

 

6) What size mains are you using? 200s

 

7) What temperature is your banshee jetted for? Idk, for nice days.

 

8) Do you have a port job? Not that I am aware of, but do have VFORCE4 reeds and bored 0.020" over.

 

9) What kind of carbs? STOCK, tors delete

 

10) What size carbs? STOCK

Link to comment
Share on other sites

  • 4 weeks later...

1) What type of aftermarket exhaust do you have? T5

2) What type of airfilter do you have? K&N PODS

3) Are you a)running a stock airbox with lid cool.gif stock airbox with NO lid c) Stock airbox with vents d) no airbox at all K&N PODS^

4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) 140 ABOVE

5) What size pilot jets are you using? UNKNOWN
 

6) What size main jets are you using? UNKNOWN

7) What temperature is your Banshee jetted for? 80 TO 100

8) Do you have a port job? MILD DRAG PORT

9) What kind of carbs?  KEIHIN PWK

10) What size carbs? 33MM

 

Link to comment
Share on other sites

1) What type of aftermarket exhaust do you have? T5

 

2) What type of airfilter do you have? 3 inch kNn type...

 

3) Are you a)running a stock airbox with lid  stock airbox with NO lid c) Stock airbox with vents d) no airbox at all straight filters

 

4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) 3,720ft

 

5) What size pilot jets are you using? 280

 

 

6) What size main jets are you using? 25

 

 

7) What temperature is your Banshee jetted for? 80 _100

 

8) Do you have a port job? no port nor polish

 

9) What kind of carbs?  mikuni

10) What size carbs? stock 26mm mikuni

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...