Jump to content

Yup another Alky Plug photo :)


troyzstang

Recommended Posts

Ok Guys . Here's a quick Alky plug test for you.

 

These plugs have never seen purge gas and have a days worth of 300ft runs on them. ( 5 runs)

 

Specs

 

10 mil on alky

40mm lectrons

Same side CPIs

+ 10 advanced timing.

 

Opinions please

Thanks

Troy

20140919_143112_zps28f269c7.jpg

 

 

 

Link to comment
Share on other sites

i wouldnt say so. typically one cylinder will need more fuel than the other. i always get the bike up to temp make a few hard passes and pull them. within 3 passes if "close" you should be able to see a 10 and 3 burn ring and a mid arch timing purple band. i was always 1-2 full turns further out on typically the stator side. it burns hotter for some reason.

 

if there is no real reason to get all the power you can i normally started rich and leaned it down until it started making decent power and left it rich. lot easier on parts.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...