Jump to content

Shearer sb oof's out left side


Recommended Posts

Chrome shearer small bore oof pipes. They both exit left side. I had Mat make them so i could run stinger tubes or remove them and run silencers if needed. Bought these brand new beginning of this yr. They have between 20-30 passes on them.(300ft) Silencers were never used or mounted. These pipes HAVE been welded on at the 4 mounting tabs were the pipes are bolted together. The tabs were not broken off, they just leaked a bit from the lack of brazing. I was gonna tig weld them until i removed the chrome and found out the tabs were brazed on. Had a buddy just "bridged" over the brazing with his mig to get them to seal. One tab kinda looked to of had a small crack developing after the brazing so that part on the pipe was tigged. The welds can be cleaned up way more but i refuse to but anymore effort into these. I also had to ream the two holes of the mounting tabs on the upper pipe to get an air gap between the two when mounted. The stinger tube holes also had to be reamed a bit because during the fabrication process they were not clocked correctly. Now, with all that said, these pipes look almost 100% new when wiped down and mounted to bike. Chrome looks as good as the day i received them besides around the repairs.

e4edu2ej.jpgavezuvy9.jpg2yzu8yza.jpgyjyju7e4.jpgenazajam.jpghumymyde.jpgta9u3u6u.jpg

Pics of mounting tab holes that were reamed.gyzuseda.jpg9y4a7uze.jpg

Pics of small rub marking on the upper&lower pipes from them rubbing against one another prior to hole reaming. vuse5use.jpgerudugud.jpg

Silencers. na8e5e6u.jpg

Pic of stinger tube holes.y2u8eraj.jpg

Over all pics of pipes. hy9y7u3e.jpgyhuzyru8.jpgve2apy8a.jpgyva7aran.jpg

I tried to take the pics at angles to make things look worse case. Like said above, pipes look great when mounted to bike and the welds can be cleaned up, Just not by this guy. Paid right around 8bills for these, want 500.00 shipped with gift or cover fees. I will keep them for anything less. I feel i gave plenty of accurate pics of current condition so there should be no surprises to new owner.

Link to comment
Share on other sites

If there wasn't no welds u might get that for them.i can get new for that price.the bike will soon vibrate the weld apart. On top of that it give the pipes a bad look.nt being mean just being honest.u want get half wat u asking because of the weld.goodluck selling.

Thanks for clearing that up for me. I was unaware of my price being too high. New price is 575.00 shipped.

 

 

 

Fucking asshole

  • Like 1
Link to comment
Share on other sites

Good seller here.

...apparently doesn't take any crap either. Hahaha

dont normally like to spat off at the mouth over the interwebz, but damn, dumby blows up my add and then claims he was interested? Clown.

Anyway, 500.00 shipped to anyone besides that bone head. Pipes are boxed up and ready to be shipped.

Link to comment
Share on other sites

Thanks. They are in super nice shape. Like said before, when mounted to the bike you will NOT notice repairs unless looking for them. And if rubber mounted to peg, these will last a very long time without needing any attention. I had them solid mounted to the peg(what was told to do) and i believe thats what caused the problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...