Motooutcastxxx Posted October 27, 2014 Report Share Posted October 27, 2014 Unfortunately the time has come for me to part out my quad (if someone is interested in the complete motor) I just don't have time to work on it and definitely no time to actually ride it. It was a 3 year long project that I finally finished and have only been able to ride twice this year for maybe 15-20 minutes a piece, if that. Since it's been rid-able (even when it wasn't quite done yet and I took it out) I've ran no more than a tank and a half of fuel through it. The head was pulled off in the Spring of 2014 to switch it out for a polished milled head from F.A.S.T. and the cylinders judging from the crosshatch marks still looked as fresh as the day I bolted them up. It's a solid stock crank stock stroke motor. If someone's seriously interested I can send a video of it running or whatever you'd like. -Herr Jugs Racing True and Weld Crank-Herr Jugs Racing MX Port-Herr Jugs Racing Modded Shift Star-F.A.S.T. Polished Milled Head w/ Acorn nuts-Vito's Degree Key - Timing Advanced +4-Chariot Billet Hi-Flo Impeller -Tusk HD Clutch Kit -Chariot EZ Drain Billet Impeller Cover; PC'd-Chariot Billet Water Pump Cover; PC'd-Billet Clutch Cover Insert; PC'd -Cascade "gear slammer" Billet shifter Only pics I have at the moment; Old pic - No PD Coolhead, different billet insert, and no more blue. Currently; I will get better pics of the motor this week, and I will get the specs on the cylinders tonight I can't remember exactly where they're at at the moment. I know I'm probably missing a shit load of info but I'm trying to get this done before it's time for me to leave the office. I will sell the motor only, that means no intakes or reed cages, no exhaust, no electronics. It will strictly be the complete motor with shifter and kicker included, basically plug it in and go for the most part. I will do $900obo shipped. Honestly I would prefer to sell the whole quad for $2k cash if anyone's interested in that. I have all receipts for this thing and they total well over that. Sorry guys no title but the VIN HAS been ran and IS free and clear. I'm only on here when I'm at the office so if you don't hear from me it's because I work 9-5 EST. Quote Link to comment Share on other sites More sharing options...
BansheeCJ3 Posted October 28, 2014 Report Share Posted October 28, 2014 Location? Quote Link to comment Share on other sites More sharing options...
1in or 300 Posted October 28, 2014 Report Share Posted October 28, 2014 Ill take the motor pm me paypal information please Quote Link to comment Share on other sites More sharing options...
Motooutcastxxx Posted October 28, 2014 Author Report Share Posted October 28, 2014 (edited) Ill take the motor pm me paypal information please PM sent.. Edited October 28, 2014 by Motooutcastxxx Quote Link to comment Share on other sites More sharing options...
Motooutcastxxx Posted October 28, 2014 Author Report Share Posted October 28, 2014 Location? Upstate, NY... About 40 miles west of Albany.. Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted October 28, 2014 Report Share Posted October 28, 2014 Good deal here!!! Are you gonna part out the rest of the bike? Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
BansheeCJ3 Posted October 28, 2014 Report Share Posted October 28, 2014 Little too far for me. I would've taken the whole bike. Is that a minus 1 or 2 swingarm? Quote Link to comment Share on other sites More sharing options...
Motooutcastxxx Posted October 28, 2014 Author Report Share Posted October 28, 2014 Good deal here!!! Are you gonna part out the rest of the bike? Sent from my iPad using Tapatalk Thanks man! It makes me sad but if the motor sells the chances are yes, I can always build another! Quote Link to comment Share on other sites More sharing options...
Motooutcastxxx Posted October 28, 2014 Author Report Share Posted October 28, 2014 The swingarm is standard length and these are the current pistons in it; I will be able to get better and more pics tomorrow too.. Quote Link to comment Share on other sites More sharing options...
Motooutcastxxx Posted October 28, 2014 Author Report Share Posted October 28, 2014 I should probably clarify the crank is OEM that's been trued and welded. Quote Link to comment Share on other sites More sharing options...
james berry Posted October 29, 2014 Report Share Posted October 29, 2014 Im interested if you start to part this out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.