Jump to content

Shear drag pipe jetting


Tommygunn

Recommended Posts

So I put some Shear SB In frames on my banshee and I'm wondering if i should I change the jetting for these pipes? The bike had FMF pipes on it before. Engine is stock bore, ported, 19cc domes, cool head, 36mm carbs. Was pouring gas out of the overflows so I adjusted the floats and seem to have fixed that problem before riding it first time after powder coating the frame.

 

Going down the road, the bike seems to have a hesitation before reaching the power band. I'm not sure if its just how the pipes are or if I have a jetting issue.

 

Thanks

Link to comment
Share on other sites

They are Keihin PJs, Not sure on jet size, I'll have to check tonight. Everything seemed right before I swapped out the pipes, but I'm not sure if I should go up in jet size, Float isn't adjusted right, or its just the way drag pipes are.

 

I'll check jet size after work and try to get a 1st-6th gear video to help show what im talking about.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...