Jump to content

Joined the Banshee club


Recommended Posts

Hey everyone. I just got a 2002 banshee. It's has Fmf fatty gold pipes and toomey silencers.

Banshee idles great after warm up and really gets going. Jetting seems off thought Haven't taken out carbs but bike seems to bog or want to stall below half throttle unless I ease it on. Once I'm passed that it really gets going. Plugs are black but they haven't fouled. I plan on going riding up in el mirage which is 2000 ft above where I'm at. Also if I turn on the choke half way the quad will turn off. That's a rich condition on the pilot and maybe needle right? At wot the quad really hauls though. What would be proper jetting for el mirage. Elevation is around 3000 and temp will be in the mid 90s.

Link to comment
Share on other sites

Clean the carbs one at a time so you don't mix shit up, set the float level, see what jets, etc are in carbs, ( install choke crossover tube if stock carbs) report back.

 

Not knowing how old plugs are or what oil/ratio was used tells nothing. Do you know what elev it was jetted for previous?

 Make sure TORS brain and parking brake are discoed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...