sms_banshee Posted July 9, 2014 Report Share Posted July 9, 2014 Hello. I have a banshee thats bored 40 over with mild porting FmF exhaust k&n pod filters tors eliminator and boost bottle. I had it tore down for 10 years do to the infamous chain break. I switched over cases and put new seals and gaskets in it. I added the tors kit and pod filters during rebuild. My main jets are 290 pilots are 25 and the needle is 3 from the bottom and 4 from the top. I'm at 700 ft elevation. It has quite a bit of white smoke coming out and the plugs are pretty clean. I turned the air fuel screw all the way in and it helped some. They were 4 out. Its Not smoking near as bad and just from running a few seconds the plugs have a little color but I was afraid it may still be lean and didn't want to chance it. I'm wondering what jets and needle position I should try. How do I know if it's too lean to let it run for a while. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 10, 2014 Report Share Posted July 10, 2014 Need more pilot for sure. 27.5 maybe 30. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.