sickOne Posted July 9, 2014 Report Share Posted July 9, 2014 (edited) I just installed a set of bills pipes with pc304 silencers,uni filter, lid ON with no snorkel im at sea level, I put a set of 260mj, stock pilot and stock needle settings, I did the plug chop with a new set of plugs and this is what I got, I think im close to where I have to be but would like some peoples opinions or any advice Edited July 9, 2014 by sickOne Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted July 9, 2014 Report Share Posted July 9, 2014 (edited) Looks about right. If the ring isnt the thickness of a nickle go a lil richer. It will be kinda cardboard colored if used only a small amount then be a bit darker if you do a few WOT passes. Up to beer bottle brown color is good, if it gets darker brown or black then its rich on either the main or needle. Its best to have the needle a bit richer color than the mainjet if you do 1/2 throttle plugchops. I like the color on 1/2 throttle chops to be a beer bottle brown at least. Edited July 9, 2014 by RadarRacing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.