Jump to content

3 Drag Bikes and 2 Very sad owners


Recommended Posts

post-47769-0-27657400-1400362722.jpg

 

Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish.

 

Starting left to right:

 

(Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP

 

 

Want to try and sell motor as a complete first asking: $5000obo

 

  • Billet 10mil crank
  • Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes
  • Vforce 2 Reeds
  • OEM stator
  • Clean bored stock cases
  • White Knuckle Billet manifold
  • 1st down 2-5 Dunable override:
  • Shearer BB OOF Left side pipes: $550
  • Packard Lectron Alky carbs 40's : $750
  • Pods: $45
  • Dyna Ignition: $275
  • Aluminum Gas tank 1.5gal: $ 150
  • +10chrome ladder bar swingarm: $350
  • JJ&A Drag Axle: $400
  • 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat  Black no title: $800 
  • Sling Shot clutch: $275
  • Front Marvins 14.5": $250
  • Rear Marvins 14.5": $130
  • Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275
  • Rear Paddles 22x11x8 10paddles triple buff: $450
  • Cut Down Black vinyl seat: $100
  • Misc internals and externals (chain guides,plastic, tensioners..etc): PM

 

(Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP

 

Parting this motor:

 

  • 4mil Hot Rod Crank: $250
  • Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400
  • Pro Design Cool Head: $75
  • OEM Stator with timing plates: $150
  • Vforce 2 reeds: $150
  • Clean stock Cases: $200
  • 1st down 2-5 Dunable override:$250
  • In Frame BB Shearer Pipes Chrome: $500
  • +8 Oval housing Top Dog chrome swing arm with flame design:$400
  • Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150
  • Roll Design Steering Stem with LSR bar clamp: $ 300
  • Chrome Clutch case: $100 
  • Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600
  • MOD QUAD Flame design Chrome stator cover: $ 150
  • Chrome J-arms made by custom creations: $275
  • Billet Manifold for 35's: $75
  • Aluminum tie rods: $25
  • Lightened Stock Frame, Black no title: $400
  • 22x11x8 Extreme buff's with 8 paddles: $450
  • Trimmed Blue plastics:$150
  • Custom covered seat with iron cross: $100
  • Billet Front hubs LSR no front brakes: $150
  • 40mm axle carrier: $70
  • Revalved Rear OEM shock done by TCS Hillshooter shock: $300
  • Misc internals and externals (chain guides, tensioners..etc): PM

 

 

(Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP

 

Want to try and sell motor as a complete first: $5000obo

  • Noss Machine Super Cub Cool Head with custom to the cylinder domes
  • Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72
  • Neutral Down dunable 1-5 override
  • Lock up clutch
  • OEM stator
  • Clean Cases match ported bored for Super Cub cylinder
  • 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450
  • Pods:$45
  • BB OOF Left side CPI's: $500
  • +8 ladder bar chromoly swing arm a little ruff: $200
  • Custom Creations drag chrome A-arms: $ 450
  • Aluminum tie rods: $25
  • White Knuckle Drag Axle: $ 450
  • Aluminum Radiator: $ 125
  • Chrome Stock Steering Stem: $100
  • Front Marvin Shaws 14": $250
  • Rear Marvin Shaw 13": $130
  • 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450
  • Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275
  • Mod Quad Polished Stator cover: $150
  • Polished Clutch Cover White knuckle: $150
  • Super cut down vinyl/fabric black checkerboard seat: $100
  • Lightened Stock frame metallic purple has title: $500
  • Misc internals and externals (chain guides, tensioners..etc):PM

 

NOTHING INCLUDES SHIPPING.

 

 

 

PM me your number and what you want a picture of or just PM for questions.

 

 Some of it may not be taken apart yet but we are working on it right now.

Link to comment
Share on other sites

Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish.

 

Starting left to right:

 

(Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP

 

 

Want to try and sell motor as a complete first asking: $5000obo

 

  • Billet 10mil crank
  • Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes
  • Vforce 2 Reeds
  • OEM stator
  • Clean bored stock cases
  • White Knuckle Billet manifold
  • 1st down 2-5 Dunable override:
  • Shearer BB OOF Left side pipes: $550
  • Packard Lectron Alky carbs 40's : $750
  • Pods: $45
  • Dyna Ignition: $275
  • Aluminum Gas tank 1.5gal: $ 150
  • +10chrome ladder bar swingarm: $350
  • JJ&A Drag Axle: $400
  • 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat  Black no title: $800 
  • Sling Shot clutch: $275
  • Front Marvins 14.5": $250
  • Rear Marvins 14.5": $130
  • Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275
  • Rear Paddles 22x11x8 10paddles triple buff: $450
  • Cut Down Black vinyl seat: $100
  • Misc internals and externals (chain guides,plastic, tensioners..etc): PM

 

(Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP

 

Parting this motor:

 

  • 4mil Hot Rod Crank: $250
  • Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 SOLD
  • Pro Design Cool Head: $75 SOLD
  • OEM Stator with timing plates: $150
  • Vforce 2 reeds: $150
  • Clean stock Cases: $200
  • 1st down 2-5 Dunable override:$250
  • In Frame BB Shearer Pipes Chrome: $500
  • +8 Oval housing Top Dog chrome swing arm with flame design:$400
  • Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150
  • Roll Design Steering Stem with LSR bar clamp: $ 300
  • Chrome Clutch case: $100 
  • Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600
  • MOD QUAD Flame design Chrome stator cover: $ 150
  • Chrome J-arms made by custom creations: $275
  • Billet Manifold for 35's: $75
  • Aluminum tie rods: $25
  • Lightened Stock Frame, Black no title: $400
  • 22x11x8 Extreme buff's with 8 paddles: $450
  • Trimmed Blue plastics:$150
  • Custom covered seat with iron cross: $100
  • Billet Front hubs LSR no front brakes: $150
  • 40mm axle carrier: $70
  • Revalved Rear OEM shock done by TCS Hillshooter shock: $300
  • Misc internals and externals (chain guides, tensioners..etc): PM

 

 

(Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP

 

Want to try and sell motor as a complete first: $5000obo

  • Noss Machine Super Cub Cool Head with custom to the cylinder domes
  • Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72
  • Neutral Down dunable 1-5 override
  • Lock up clutch
  • OEM stator
  • Clean Cases match ported bored for Super Cub cylinder
  • 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450
  • Pods:$45
  • BB OOF Left side CPI's: $500
  • +8 ladder bar chromoly swing arm a little ruff: $200
  • Custom Creations drag chrome A-arms: $ 450
  • Aluminum tie rods: $25
  • JJ&A Drag Axle: $ 450 SOLD
  • Aluminum Radiator: $ 125
  • Chrome Stock Steering Stem: $100
  • Front Marvin Shaws 14": $250
  • Rear Marvin Shaw 13": $130
  • 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450
  • Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275
  • Mod Quad Polished Stator cover: $150
  • Polished Clutch Cover White knuckle: $150
  • Super cut down vinyl/fabric black checkerboard seat: $100
  • Lightened Stock frame metallic purple has title: $500
  • Misc internals and externals (chain guides, tensioners..etc):PM

 

NOTHING INCLUDES SHIPPING.

 

 

 

PM me your number and what you want a picture of or just PM for questions.

 

 Some of it may not be taken apart yet but we are working on it right now.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...