JCSO605 Posted July 26, 2014 Report Share Posted July 26, 2014 Wanting to know if my 39.5 mikuni Tms set up for alky will work and produce good power safely on a 10 mil dm? If so can anyone get me close on the jetting? Oof drag pipes 100ft asl 80-100 degrees. Jetting on carbs is currently 45 pilot pjs dump .118 main .118 needle on fourth clip. Thanks Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted July 26, 2014 Report Share Posted July 26, 2014 60 pilot atleast. .119-.125 main Quote Link to comment Share on other sites More sharing options...
JCSO605 Posted July 26, 2014 Author Report Share Posted July 26, 2014 Thank you. Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted July 27, 2014 Report Share Posted July 27, 2014 The bigger motors draw more fuel then smaller ones... You don't need a big ass dump size. I have .118 main and dumps and 55 pilots in my 10 dm. Turn pjs wide open then slowly close them up like a 1/4-1/2 turn at a time till ya start gettin heat on the plugs after a few passes Quote Link to comment Share on other sites More sharing options...
JCSO605 Posted July 27, 2014 Author Report Share Posted July 27, 2014 10-4. Thanks for the info guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.