garretttt4 Posted April 27, 2016 Report Share Posted April 27, 2016 I have a 2000 shee with stock bore wiseco pistons, v force 3 reeds, cool head with 21cc domes on pump 92 gas mixed at 45.1 with bel ray synthetic. no air box, just uni foam clamp on filters and toomey t5 pipes. Ran at about 1500-2000' elevation. What jetting should I be running before I start it for the first time? Was thinking 300 and 27.5 but I have no idea... Quote Link to comment Share on other sites More sharing options...
guns4children Posted April 27, 2016 Report Share Posted April 27, 2016 That sounds safe to me Quote Link to comment Share on other sites More sharing options...
garretttt4 Posted April 27, 2016 Author Report Share Posted April 27, 2016 That sounds safe to me Ok thanks! Quote Link to comment Share on other sites More sharing options...
Shee_fast Posted April 27, 2016 Report Share Posted April 27, 2016 Plug chop to make sure Sent from my VS810PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
guns4children Posted April 28, 2016 Report Share Posted April 28, 2016 Do a leak down test Quote Link to comment Share on other sites More sharing options...
garretttt4 Posted April 28, 2016 Author Report Share Posted April 28, 2016 Do a leak down test I need to buy a tester. Would I be stupid to start it without testing it? Quote Link to comment Share on other sites More sharing options...
garretttt4 Posted April 28, 2016 Author Report Share Posted April 28, 2016 Plug chop to make sure Sent from my VS810PP using Tapatalk Ok I'll have to remember to do that. Quote Link to comment Share on other sites More sharing options...
guns4children Posted April 28, 2016 Report Share Posted April 28, 2016 I need to buy a tester. Would I be stupid to start it without testing it? I don't think so cause I've never tested mine and its been running for 5 years. Most guys on here though will point to that if you have any problems in the future. Quote Link to comment Share on other sites More sharing options...
kawa110 Posted April 28, 2016 Report Share Posted April 28, 2016 Leak down is cheap insurance....plug chop for final tune.... If you have air leak your plug chop readings will be off and useless Quote Link to comment Share on other sites More sharing options...
garretttt4 Posted April 28, 2016 Author Report Share Posted April 28, 2016 Ok well I'll just have to get one asap before I chop the plugs and make sure. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.