evict Posted October 10, 2015 Report Share Posted October 10, 2015 (edited) Hello everyone! I bought an 05 SE Banshee, all stock. Decided to throw on some FMF exhausts on it, along with a boost bottle. I haven't taken it out riding other than around my block a few times, because I've heard you shouldn't ride it without it being jetted. I know you guys get asked this every day a thousand times, but what would be a guesstimate of the jets i should put in? Also do I NEED to take out the old air box and put in new filters? If so, any recommandations? Edited October 10, 2015 by evict Quote Link to comment Share on other sites More sharing options...
camp0429 Posted October 10, 2015 Report Share Posted October 10, 2015 http://www.fmfracing.com/RiderSupport/JettingCenter Quote Link to comment Share on other sites More sharing options...
evict Posted October 10, 2015 Author Report Share Posted October 10, 2015 I checked that when I first put the exhausts on, but 260 would be ideal for having a new air filter on also? Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted October 10, 2015 Report Share Posted October 10, 2015 I checked that when I first put the exhausts on, but 260 would be ideal for having a new air filter on also?You need to list a lot more info. There's a sticky around the jetting section. Many members have put what pipes, asl, carbs, filters..ect. check it out, and you may find a setup similar to yours. sent from yo mammy house. Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted October 13, 2015 Report Share Posted October 13, 2015 Stock box with lid 260 main 30 pilot needle 4th clip 1 turn on air screw, take the lid off and bump mains to 280 . Go with pods start at 300 main Quote Link to comment Share on other sites More sharing options...
evict Posted October 14, 2015 Author Report Share Posted October 14, 2015 Thanks Quote Link to comment Share on other sites More sharing options...
Lowroll Posted October 15, 2015 Report Share Posted October 15, 2015 Surprised nobody mentioned it, but everyone says to not run a boost bottle, they're a gimmick part that will just lead you to cracked intake boots. go back to stock crossover tube Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.