Jump to content

Jetting


JordyRoo

Recommended Posts

Hey guys, new to the forum & fairly new to banshee's, just picked up my 04 today, runs well top end but a little sluggish & flat from idle to 1/4 / 1/2 throttle. The guy i got it from said itd just been in the shop for a rejet. Im not sure what pilots in there. The receipts say 245 main though. Its got FMF expansion chambers & FMF PC2 silencers also got a K&N filter with standard airbox & lid. Its come with an FMF boost bottle but its not fitted. Elevation is around 500ft. Anybody got any ideas on what the jetting should be give or take? Thanks in advance!

Link to comment
Share on other sites

  • 4 weeks later...

Welcome to the site!!
What oil are you using in your premix and what ratio?
If stock carbs, no such thing as a 245 main jet.
Per FMF's site, 30 pilots, 260 mains, needle stock, middle groove, air screw 1.5 turns out.

It states right in the text that there are too many variable to tuning, so this is a starting point.

 

Due to you having the airbox and lid, I recommend 27.5 pilots, 260 mains, needle clips middle groove and 1.5 turns out on your air screws.

You want the snappiest rev off idle.

If you end up < 1 turn out on the air screws, then increase pilot jets 1 size.

 

fmf_jetting.jpg
 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...