hercalmighty Posted September 28, 2015 Report Share Posted September 28, 2015 Ok guys, I have a question about doing a plug chop. I know you need to do a 6th gear pull wot then cut the engine and cost to a stop. Now, the question is, do I need to hold it wide open through all the gears to 6th gear or can I take it a little easy up to 6th then pin it? The reason I'm asking is because the thing doesn't want to shift well under pull power. I know I need to get the trans cut but I want to wait til the winter to pull the motor apart again. I just want to check my jetting to get some riding in before the winter Sent from my VS980 4G using Tapatalk Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted September 28, 2015 Report Share Posted September 28, 2015 Yes that's fine bring it through the gears easy I don't bounce the thing off the limiter either but end it wide open leaving throttle open through shutdown and coast Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 29, 2015 Report Share Posted September 29, 2015 Yes that's fine bring it through the gears easy I don't bounce the thing off the limiter either but end it wide open leaving throttle open through shutdown and coastYou mean it's not a good idea to totally cut fuel at 9,000 RPM's? I tell people to do it that way and just get told that the fuel will wash the color, but IMO good color won't wash. Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted September 29, 2015 Author Report Share Posted September 29, 2015 Cool thanks. I didn't think I was going to need a promod trans. Well, I was wrong lol Sent from my VS980 4G using Tapatalk Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted September 30, 2015 Report Share Posted September 30, 2015 Let me know if u need one Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted September 30, 2015 Author Report Share Posted September 30, 2015 I sure do need one lol. My old 4mil dune port shifted great. This 7mil cheetah, not so much Sent from my VS980 4G using Tapatalk Quote Link to comment Share on other sites More sharing options...
ScEaMin BaNsheE 305 Posted October 1, 2015 Report Share Posted October 1, 2015 how much does a promod tranny go for? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.