prosser9981 Posted September 24, 2015 Report Share Posted September 24, 2015 Hey guys, I know this thread is seen everyday, but just need a little help to get my bike dialed in. Bike doesn't run quite right, and will be doing a plug chop this weekend. The guy i bought the bike from purchased a jet kit and it's running 340 mains, 25 pilots. Air mixture screws are about 5 turns out. Does anyone have similar mods with any recommendations of jet sizes? Mods are; Toomey T5 K&n filter K&n air box lid Reeds(stock cages) Boost bottle 1/4" reed spacer Port work Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 24, 2015 Report Share Posted September 24, 2015 To much main and not enough pilot 27.5-30 300-340 Bring screws in to 1.5 Needle middle position. Toomey needle? It depends on port work temp and elevation. All things are a base. Most of what I said will change. But should be ball park 1 Quote Link to comment Share on other sites More sharing options...
alexmarq1986 Posted September 24, 2015 Report Share Posted September 24, 2015 the main should be at 270-280 and the pilot at 27.5 is my opinion, but elevation will have a lot to do with determining the main. Quote Link to comment Share on other sites More sharing options...
prosser9981 Posted September 24, 2015 Author Report Share Posted September 24, 2015 270-280 mains isn't on the lean side for the noted mods? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 25, 2015 Report Share Posted September 25, 2015 270-280 mains isn't on the lean side for the noted mods?Definitely on the edge. I bet it's closer to 300. Quote Link to comment Share on other sites More sharing options...
prosser9981 Posted September 26, 2015 Author Report Share Posted September 26, 2015 Stock pilots ok? Needle position? Thanks Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted September 26, 2015 Report Share Posted September 26, 2015 Stock pilots ok?No, with your mods, stock pilots are not OK!!Needle position?Needle clip middle groove!! To much main and not enough pilot 27.5-30 300-340 Bring screws in to 1.5 Needle middle position. Toomey needle? It depends on port work temp and elevation. All things are a base. Most of what I said will change. But should be ball park I'm not sure why you ignored sheerider's advice.There's absofuckinglutely no way your airscrews are 5 turns out. Try seating them gently and then back them out 1.5 turns. What's your elevation and temp numbnutz?? Quote Link to comment Share on other sites More sharing options...
prosser9981 Posted September 26, 2015 Author Report Share Posted September 26, 2015 No, with your mods, stock pilots are not OK!! Needle clip middle groove!! I'm not sure why you ignored sheerider's advice. There's absofuckinglutely no way your airscrews are 5 turns out. Try seating them gently and then back them out 1.5 turns. What's your elevation and temp numbnutz?? Quote Link to comment Share on other sites More sharing options...
prosser9981 Posted September 26, 2015 Author Report Share Posted September 26, 2015 Bike is now dialed in, your advice is terrible Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted September 26, 2015 Report Share Posted September 26, 2015 Bike is now dialed in, your advice is terribleUmmKay...You want to enlighten us then? Quote Link to comment Share on other sites More sharing options...
The Notorious 1 Posted September 26, 2015 Report Share Posted September 26, 2015 Bike is now dialed in, your advice is terrible Who dialed it in for you? Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted September 26, 2015 Report Share Posted September 26, 2015 Bike is now dialed in, your advice is terriblePusser maybe your tuning skill is terrible. You asked a question, and received good advice. sent from yo mammy house. Quote Link to comment Share on other sites More sharing options...
prosser9981 Posted September 27, 2015 Author Report Share Posted September 27, 2015 Sorry guys, had a buddy dicking around with my account. "Sheerider"''s advice was bang on, and the bike is running great. Successful plug chop proven. Thanks for the tips! Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted September 27, 2015 Report Share Posted September 27, 2015 With portwork 340-360 main 27.5-30 pilot toomey needle 2nd clip from blunt end Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted September 27, 2015 Report Share Posted September 27, 2015 Tell your buddy to go eat a bag of dicks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.