Silverlake Posted July 11, 2015 Report Share Posted July 11, 2015 I bought a banshee back in march, have been riding it and the jetting is way off. I have vforce 3 reeds, fmf gold series pipes, k and n air filter with airbox lid. Can someone please steer me in the right direction for. 1 main jet size. 2 pilot jet size. 3 needle clip location. 4 any other recomendations. Thankyou Quote Link to comment Share on other sites More sharing options...
Silverlake Posted July 11, 2015 Author Report Share Posted July 11, 2015 Stock carbs, no port, 600 ft above sea level Quote Link to comment Share on other sites More sharing options...
OutlawCM85 Posted July 11, 2015 Report Share Posted July 11, 2015 Go to jetting forum and type in what size jets are you running and look at the different settops . Sent from my SCH-R530U using Tapatalk Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted July 11, 2015 Report Share Posted July 11, 2015 270 -starting point in main 27.5 pilot Needle in the middle clip. Start there and read plugs Quote Link to comment Share on other sites More sharing options...
Silverlake Posted July 11, 2015 Author Report Share Posted July 11, 2015 Perfect thankyou, I know how to do plug chops and everything it was just getting the jets all in line first Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted July 11, 2015 Report Share Posted July 11, 2015 Perfect thankyou, I know how to do plug chops and everything it was just getting the jets all in line first Might want to do a leak down. Don't want to jet around an air leak. Good thing to do when you buy a used banshee and after a fresh rebuild. Your pulling the carbs anyways. It's a piece of mind and cheap insurance. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted July 11, 2015 Report Share Posted July 11, 2015 when you say the jetting isnt right, do you think its lean or rich? whats in it now for jets? Quote Link to comment Share on other sites More sharing options...
Silverlake Posted July 11, 2015 Author Report Share Posted July 11, 2015 It's too rich, Honestly I checked the mains and they weren't hex jets and im not really sure of the size because they didnt have 270 for example on it, I beleive it said 18, as it was a round jet with a line through it Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted July 12, 2015 Report Share Posted July 12, 2015 It's too rich, Honestly I checked the mains and they weren't hex jets and im not really sure of the size because they didnt have 270 for example on it, I beleive it said 18, as it was a round jet with a line through it Are they mikuni carbs? Quote Link to comment Share on other sites More sharing options...
Silverlake Posted July 12, 2015 Author Report Share Posted July 12, 2015 Stock 26 mm mikuni Quote Link to comment Share on other sites More sharing options...
Silverlake Posted July 12, 2015 Author Report Share Posted July 12, 2015 Stock 26 mm mikuni Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted July 12, 2015 Report Share Posted July 12, 2015 Then you need hex 270 mains Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.