theputz Posted May 23, 2015 Report Share Posted May 23, 2015 Hey folks. Trying to decide what a arm and jj and a axle to get. Do 40% drag, 40% hill shoots and 20% dunking to get to either or. I like the look of a -2+2 a arm and axle to match but worried this will be to tippy when duning. Would the hillshooter axle be the right way to go as it has 4 inches of adjustment? Thanks Quote Link to comment Share on other sites More sharing options...
toytech Posted May 26, 2015 Report Share Posted May 26, 2015 unless its an all out drag bike I would not make it any narrower. too unstable. Quote Link to comment Share on other sites More sharing options...
theputz Posted May 26, 2015 Author Report Share Posted May 26, 2015 I have +2+1 now. How would 0+2 do then? Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted May 26, 2015 Report Share Posted May 26, 2015 I would just go back to stock width a-arms and go with a jj&a play axle. You don't have to put the stock arms back on, you could have some built to get away from the sketchy ball joints that come from the factory. I agree with toy tech. Don't buy a drag axle if your still duning it. Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 27, 2015 Report Share Posted May 27, 2015 If you wanna sell the arms let me know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.