doctorwyant Posted March 5, 2015 Report Share Posted March 5, 2015 My banshee is running stock jets 250/25 FMF gold series and Fmf silencers, I was informed it also has mild porting. I don't know enough about jetting to figure this out on my own so a little help would be appreciated. With the Jets it has now it would run very lean and get way too hot right? I ran it up and down the hill for a minute and it rode with a lot of power and felt solid but I realized that probably wasn't the best idea without knowing what I should be running and by the time I pulled it back into the garage the rubber in the exaust clamps had started melting and smoking. I've parked it and it's on the lift now. I'm assuming it needs more fuel so a larger jet is needed but correct me if I'm wrong. How do I determine what jetting I should have? Quote Link to comment Share on other sites More sharing options...
doctorwyant Posted March 5, 2015 Author Report Share Posted March 5, 2015 Stock mikunis* Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted March 6, 2015 Report Share Posted March 6, 2015 Air box? Pods? Reeds? Quote Link to comment Share on other sites More sharing options...
doctorwyant Posted March 6, 2015 Author Report Share Posted March 6, 2015 K&n pods, I'm not sure about the reeds, how can I identify what type I have? Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted March 6, 2015 Report Share Posted March 6, 2015 340 main 30 pilot stock needle 4 th clip to start should be safe to start ghere Quote Link to comment Share on other sites More sharing options...
CarvedArt Posted March 6, 2015 Report Share Posted March 6, 2015 My banshee is running stock jets 250/25 FMF gold series and Fmf silencers, I was informed it also has mild porting. I don't know enough about jetting to figure this out on my own so a little help would be appreciated. With the Jets it has now it would run very lean and get way too hot right? I ran it up and down the hill for a minute and it rode with a lot of power and felt solid but I realized that probably wasn't the best idea without knowing what I should be running and by the time I pulled it back into the garage the rubber in the exaust clamps had started melting and smoking. I've parked it and it's on the lift now. I'm assuming it needs more fuel so a larger jet is needed but correct me if I'm wrong. How do I determine what jetting I should have? Try this to get you a little more knowledge about jetting: http://www.bansheehq.com/forums/index.php?/topic/133410-Banshee-Digital-Toolkit#entry1695166 Do it till it Hertz Quote Link to comment Share on other sites More sharing options...
doctorwyant Posted March 6, 2015 Author Report Share Posted March 6, 2015 Fucking just what I needed, thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.