YamahahCya Posted February 17, 2015 Report Share Posted February 17, 2015 my banshees pipes where they come off the motor get hot literally in id say a minute,i havent let them but they get way too warm in 30sec. im not sure what jets to use or how far to turn my mix screws out or if i should mess with the needles or anything, & what upgrades determine if i need bigger jets ill let you guys know what i have Quote Link to comment Share on other sites More sharing options...
YamahahCya Posted February 17, 2015 Author Report Share Posted February 17, 2015 im at just 100ft & its around 20° here Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted February 18, 2015 Report Share Posted February 18, 2015 What pipes, porting, air filter setup? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 18, 2015 Report Share Posted February 18, 2015 ^ everything on the motor. Quote Link to comment Share on other sites More sharing options...
YamahahCya Posted February 18, 2015 Author Report Share Posted February 18, 2015 .030 topend 4mil, yes with porting Pro Designs Cool Head 19cc domes VForce3 carbon fiber reeds w/ aluminum spacers T5 pipes i believe +4 timing? Pro Flow Intake K&N Filter no cover Moose Boost Bottle Quote Link to comment Share on other sites More sharing options...
YamahahCya Posted February 18, 2015 Author Report Share Posted February 18, 2015 forgot 36mm carbs Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 18, 2015 Report Share Posted February 18, 2015 What type of porting, and are the 36's mikuni or Keihin? Quote Link to comment Share on other sites More sharing options...
YamahahCya Posted February 18, 2015 Author Report Share Posted February 18, 2015 no idea about the porting, & its mikuni. im only running 25 pilots & 300 mains Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 18, 2015 Report Share Posted February 18, 2015 Gonna need atleast 27.5 pilot. But I would try a 30 pilot. 320 main. Probably have to just start the needle in the middle and fine tune it once the pilot and main are sorted. Quote Link to comment Share on other sites More sharing options...
YamahahCya Posted February 18, 2015 Author Report Share Posted February 18, 2015 ok, is this most likely the reason my quad has been overheating so fast though? my t5s up by my leg will get burning hot if i let them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.