turbowrenchhead Posted June 5, 2013 Report Share Posted June 5, 2013 I bought a $40 set of banshee exhaust joints off of ebay. They didn't last an hour or riding and they started tearing apart. What does everyone like to run? I though intercooler hose would work good but the local truck shops dont have anything that small. Quote Link to comment Share on other sites More sharing options...
Nightmare Posted June 5, 2013 Report Share Posted June 5, 2013 I think its 5/8 heater hose that you can use.<br /><br />Sent from my SGH-T679 using Tapatalk 2<br /><br /> Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted June 5, 2013 Report Share Posted June 5, 2013 I used some radiator hose from auto parts store, cut it and clamp it. do your silencers slide into the pipe at all? that joint shouldn't see a lot of flex to begin with I wouldn't think. Quote Link to comment Share on other sites More sharing options...
turbowrenchhead Posted June 5, 2013 Author Report Share Posted June 5, 2013 They barely slide in. I found some silicone hose at a local auto parts store that will get it running again for now. I found some nice 1" intercooler hose on ebay for a reasonable price. http://www.ebay.com/itm/310528030733?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Quote Link to comment Share on other sites More sharing options...
turbowrenchhead Posted June 5, 2013 Author Report Share Posted June 5, 2013 These clamps look nice too. http://www.ebay.com/itm/200806957520?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted June 5, 2013 Report Share Posted June 5, 2013 Lots of orange silicone tin foil 5 zip ties. Done. Quote Link to comment Share on other sites More sharing options...
5150banshee Posted June 5, 2013 Report Share Posted June 5, 2013 I run the cascade clamps on my t5's there are really tight and a bitch to get on but they last forever. Sent using Tapatalk Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted June 5, 2013 Report Share Posted June 5, 2013 I run the cascade clamps on my t5's there are really tight and a bitch to get on but they last forever. Sent using Tapatalk ^^^^ X2 ^^^^ I run those on all the bikes. DA BEST. Cascade Innovations Quote Link to comment Share on other sites More sharing options...
Finch Posted June 5, 2013 Report Share Posted June 5, 2013 ^^^^ X2 ^^^^ I run those on all the bikes. DA BEST. Cascade Innovations x3 Quote Link to comment Share on other sites More sharing options...
do-work-son Posted June 5, 2013 Report Share Posted June 5, 2013 I run the cascade clamps on my t5's there are really tight and a bitch to get on but they last forever. Sent using Tapatalk X4 go them on a couple bike are kinda a pain to put on some time Quote Link to comment Share on other sites More sharing options...
turbowrenchhead Posted June 6, 2013 Author Report Share Posted June 6, 2013 I found some 1" silicone hose today. It was a tight fit but it slide on with some silicone spray. Its clamped down tight with regular hose clamps. Where do you get the cascade clamps? Quote Link to comment Share on other sites More sharing options...
turbowrenchhead Posted June 6, 2013 Author Report Share Posted June 6, 2013 I'm going to run the bike on Friday so I needed a quick fix for now. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted June 6, 2013 Report Share Posted June 6, 2013 Get them here http://67.199.65.66/cascade_innovations/newlook/Modern_clean.cfm I run them on all mine too, They go on easy with a little dash soap (in Cascades instructions) Quote Link to comment Share on other sites More sharing options...
turbowrenchhead Posted June 6, 2013 Author Report Share Posted June 6, 2013 For the same money I could of had those, damn! Quote Link to comment Share on other sites More sharing options...
erickson483 Posted June 7, 2013 Report Share Posted June 7, 2013 X2 heater hose. I use some that I found at the hardware store. It's a tight squeeze, then with some clamps it is a good seal. But, obviously it's not as clean as those pretty cascades! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.